HardLabs

Speedy barebone

UofA-SPEAR·pcb_designs·kicad/spear-dev-board/SPEEDY_BARBONE/speedy barebone.kicad_pcb

Speedy barebone PCB layout, top view — open source STM32 board by UofA-SPEAR

About the Speedy barebone PCB

Speedy barebone is an open source STM32 PCB design by UofA-SPEAR, published on GitHub. It is a 2-layer board measuring 51.2 × 23 mm, with 23 components from 14 distinct parts.

Its main chip is the STM32F103C8T6, from the STM32 family. Other key parts include the 3.3V, MCP2562-E/SN and 4.2X3.25-TACTILE-SWITCH. By type, the board carries 11 capacitors, 4 ICs, 3 jumpers, 3 resistors, 1 crystal and 1 LED.

From the project

A place for SPEAR PCBs

Central repository to hold PCB designs for SPEAR.

All board documentation shall be held in the Wiki..

If you plan on contributing to the PCB designs, first, you need to go through this list:

1. Sign up for github, and fill out the new member form (contact the current team lead for this). 2. Follow the GitHub Guides, specifically: - "Hello World" - "Understanding the GitHub flow." - "Documenting your projects on GitHub" 3. Follow the Onboarding Task.

Main components on the Speedy barebone

STM32F103C8T63.3VMCP2562-E/SN4.2X3.25-TACTILE-SWITCH

Speedy barebone bill of materials (BOM)

23 components, 14 distinct parts.

QtyPartRefs
1
STM32F103C8T6
IC2
1
3.3V
U1
1
MCP2562-E/SN
U$1
1
4.2X3.25-TACTILE-SWITCH
U$2
1
8MHz
X1
2
—
JP1, JP2
1
—
JP3
1
—
LED2
2
10uF
C1, C2
7
100nF
C3, C7, C10, C14, C15, C16, C17
2
22pF
C4, C5
1
100k
R1
1
10k
R8
1
1k
R10

Speedy barebone design files

The KiCad project lives in the UofA-SPEAR/pcb_designs repository on GitHub; these links point at the commit this page was built from.

Speedy barebone: common questions

What microcontroller does the Speedy barebone use?

The Speedy barebone is built around the STM32F103C8T6, from the STM32 family.

How big is the Speedy barebone PCB?

The Speedy barebone measures 51.2 × 23 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Speedy barebone?

23 components, from 14 distinct parts. The full bill of materials is listed on this page.

Where can I download the Speedy barebone design files?

From the UofA-SPEAR/pcb_designs repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Speedy barebone design in my own project?

The repository has no license, so all rights stay with UofA-SPEAR. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Speedy barebone without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in pcb_designs

Similar boards