Dev Board
About the Dev Board
Dev Board is an open source PCB design by ut-ras, published on GitHub. It is a 2-layer board measuring 46.1 × 70.9 mm, with 38 components from 10 distinct parts.
By type, the board carries 8 diodes, 3 test points and 2 connectors.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Welcome! Please read the Wiki page for information on how to set up your computer and an overview of the projects in this repository.
Dev Board bill of materials (BOM)
38 components, 10 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | Conn_01x04 | PinHeader_1x04_P2.54mm_Vertical | J1, J2 |
| 8 | Conn_01x03 | PinSocket_1x03_P2.54mm_Vertical | DBUS1, PWM_R1, PWM_R2, PWM_R3, PWM_R4, PWM_R5, PWM_R6, PWM_R7 |
| 1 | Conn_02x04_Odd_Even | PinSocket_2x04_P2.54mm_Vertical | IO_Port1 |
| 8 | Conn_01x02 | AMASS_XT30U-F_1x02_P5.0mm_Vertical | In_Port1, In_Port2, Out_Port1, Out_Port2, Out_Port3, Out_Port4, Out_Port6, Out_Port8 |
| 8 | Conn_01x03 | PinHeader_1x03_P2.54mm_Vertical | PWM_R8, PWM_R9, PWM_R10, PWM_R11, PWM_R12, PWM_R13, PWM_R14, PWM_R15 |
| 3 | TestPoint_2Pole | TestPoint_2Pads_Pitch2.54mm_Drill0.8mm | TP1, TP4, TP5 |
| 1 | 150060BS75000 D | Nexperia_DSN0603-2_0.6x0.3mm_P0.4mm | D1 |
| 1 | SR54F-AU_R2_000A1 D | Nexperia_DSN0603-2_0.6x0.3mm_P0.4mm | D4 |
| 1 | 150060YS75000 D | Nexperia_DSN0603-2_0.6x0.3mm_P0.4mm | D7 |
| 5 | D | Nexperia_DSN0603-2_0.6x0.3mm_P0.4mm | D11, D14, D17, D20, D23 |
Dev Board design files
The KiCad project lives in the ut-ras/robomaster_hardware repository on GitHub; these links point at the commit this page was built from.
Dev Board: common questions
How big is the Dev Board?
The Dev Board measures 46.1 × 70.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Dev Board?
38 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Dev Board design files?
From the ut-ras/robomaster_hardware repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Dev Board design in my own project?
The repository has no license, so all rights stay with ut-ras. Use it as a reference, and ask the author before reusing the design.
More boards in robomaster_hardware
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2k
Eecv breakout
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
Breakout 60pin EEC-IV
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
134pin 7-967288-1
139.7 × 73.7 mm38 parts2LGPL-3.01.2k
88 Pin Vag Breakout
142 × 58 mm91 parts2LGPL-3.01.2k
Rj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979