FOME Open Source Wideband O2 Module

v3ai·miata-ecus·scripts/wideband_ref/wideband_controller.kicad_pcb

FOME Open Source Wideband O2 Module layout, top view — open source STM32 board by v3ai

About the FOME Open Source Wideband O2 Module

FOME Open Source Wideband O2 Module is an open source STM32 PCB design by v3ai, published on GitHub under the MIT license. It is a 4-layer board measuring 29 × 20.9 mm, with 59 components from 47 distinct parts.

Its main chip is the STM32F407VGT6, from the STM32 family. Other key parts include the LMR14020, TLS115B0EJ, ULN2003AD and MAX9926UAEE+. By type, the board carries 31 resistors, 16 capacitors, 5 ICs, 4 diodes, 2 connectors and 1 transistor.

From the project

A plug-in rusEFI engine computer for the 1989–2005 Mazda Miata (NA and NB). It has two parts:

A plug-in rusEFI engine computer for the 1989–2005 Mazda Miata (NA and NB). It has two parts:

- One universal daughterboard. It does all the engine control: an STM32F407 running rusEFI, plus an on-board LSU 4.9 wideband controller (the open-source FOME/rusEFI design). - A motherboard for each model year. Each one fits the stock ECU case, takes the stock harness connector and carries the year-specific wiring, the MAP sensor, the LSU/IAT connectors and USB-C.

FOME Open Source Wideband O2 Module, from the project README
From the project README

Main components on the FOME Open Source Wideband O2 Module

FOME Open Source Wideband O2 Module bill of materials (BOM)

59 components, 47 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
STM32F407VGT6
MCP6004
U1
1
LMR14020
STM32F042K6Tx
U2
1
TLS115B0EJ
REF3033
U3
1
ULN2003AD
AD8628
U5
1
MAX9926UAEE+
XC6206P332MR
U9
1
AUIPS2041LTR
VND14NV04
Q1
1
C2977586
Conn_01x08
J1
1
Conn_01x08
J3
1
C72043
RED
D1
1
C72041
GREEN
D2
1
C72038
BLUE
D3
1
C2286
RED
D4
3
100N
1u
C1, C4, C6
3
100N
100n
C2, C5, C12
1
100N
33n
C3
1
4.7U
1u
C7
1
4.7U
100n
C8
1
2.2U
100n
C9
1
2.2U
4.7u
C10
1
100n
C11
Show 27 more
QtyPartRefs
2
22P
100n
C13, C14
1
10U/50V
100n
C16
1
10U/50V
1u
C17
4
10K
1k
R1, R25, R26, R30
1
1k
R2
2
10k
R3, R4
2
27k
R5, R7
1
22k
R6
1
10K
47
R8
1
68K
10
R9
1
12K
61.9
R10
1
33K
10k
R11
1
6.8K
10k
R12
1
33K
1k
R13
1
6.8K
62k
R14
2
100
100k
R15, R17
1
100
6.8k
R16
1
100
1k
R18
1
10K
47k
R19
1
10K
100k
R20
1
10K
10k
R21
1
10K
3.3k
R24
1
5.6K
1k
R27
2
5.6K
10k
R29, R34
1
5.6K
68k
R31
1
10K
68k
R32
1
2.7K
10k
R33

FOME Open Source Wideband O2 Module design files

The KiCad project lives in the v3ai/miata-ecus repository on GitHub; these links point at the commit this page was built from.

FOME Open Source Wideband O2 Module: common questions

What microcontroller does the FOME Open Source Wideband O2 Module use?

The FOME Open Source Wideband O2 Module is built around the STM32F407VGT6, from the STM32 family.

How big is the FOME Open Source Wideband O2 Module?

The FOME Open Source Wideband O2 Module measures 29 × 20.9 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the FOME Open Source Wideband O2 Module?

59 components, from 47 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the FOME Open Source Wideband O2 Module design files?

From the v3ai/miata-ecus repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the FOME Open Source Wideband O2 Module design in my own project?

Yes, under the terms of its MIT license, which v3ai chose for the repository.

Can I test firmware for the FOME Open Source Wideband O2 Module without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in miata-ecus

Similar boards