Miata mb 9697
v3ai·miata-ecus·motherboards/1996-97/miata_mb_9697.kicad_pcb
About the Miata mb 9697 PCB
Miata mb 9697 is an open source PCB design by v3ai, published on GitHub under the MIT license. It is a 2-layer board measuring 154 × 161.5 mm, with 23 components from 20 distinct parts.
Other key parts include the MPX5700AP and USBLC6-2SC6. By type, the board carries 7 resistors, 5 connectors, 3 capacitors, 2 ICs, 2 fuses and 1 jumper.
It belongs with the sensors designs in this gallery.
From the project
The motherboard replaces the stock Mazda ECU board inside the stock ECU case. It carries:
The motherboard replaces the stock Mazda ECU board inside the stock ECU case. It carries:
- the stock harness header; - the year-independent I/O: the LSU 4.9 wideband sensor connector, IAT, USB-C and the MAP sensor; - the sockets for the universal daughterboard, which does all the engine control (including the wideband controller).
Board: 154.0 × 161.5 mm, 1.6 mm. The origin is the top-left corner and y points down, toward the bottom edge.
Main components on the Miata mb 9697
Miata mb 9697 bill of materials (BOM)
23 components, 20 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MPX5700AP | MPX5700AP_867B_Flat | U2 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U4 |
| 1 | TE 178780-1 | TE_178780-1_76P | J1 |
| 1 | C127367 LSU 4.9 | Molex_Micro-Fit_3.0_43045-0600_2x03_P3.00mm_Horizontal | J2 |
| 1 | C587650 IAT | Molex_Micro-Fit_3.0_43650-0200_1x02_P3.00mm_Horizontal | J3 |
| 1 | C3020560 USB-C | USB_C_GCT_USB4105_16P | J4 |
| 1 | C3406 AUX 2x8 | IDC-Header_2x08_P2.54mm_Vertical | J5 |
| 1 | C46641168 2A hold | Fuse_1812_4532Metric | F1 |
| 1 | C209741 0.5A hold | Fuse_1206_3216Metric | F4 |
| 1 | C124412 Socket 1x40 (daughter J1) | PinSocket_1x40_P2.54mm_Vertical | JD1 |
| 1 | C124412 Socket 1x40 (daughter J2) | PinSocket_1x40_P2.54mm_Vertical | JD2 |
| 1 | C49257 IAT SEL | PinHeader_1x03_P2.54mm_Vertical | JP1 |
| 1 | SS34 | D_SMA | D1 |
| 1 | 1u | C_0603_1608Metric | C1 |
| 1 | 10N 10n | C_0603_1608Metric | C2 |
| 1 | 470P 470p | C_0603_1608Metric | C3 |
| 1 | 120 | R_0603_1608Metric | R1 |
| 2 | 5.1K 5.1k | R_0603_1608Metric | R2, R3 |
| 1 | C21189 0R | R_0603_1608Metric | R6 |
| 3 | 4.7k | R_0603_1608Metric | R20, R21, R22 |
Miata mb 9697 design files
The KiCad project lives in the v3ai/miata-ecus repository on GitHub; these links point at the commit this page was built from.
Miata mb 9697: common questions
How big is the Miata mb 9697 PCB?
The Miata mb 9697 measures 154 × 161.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Miata mb 9697?
23 components, from 20 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Miata mb 9697 design files?
From the v3ai/miata-ecus repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Miata mb 9697 design in my own project?
Yes, under the terms of its MIT license, which v3ai chose for the repository.
More boards in miata-ecus
STM32
Miata ecu daughter
v3ai
125 × 60 mm226 parts4LMIT0STM32
FOME Open Source Wideband O2 Module
v3ai
29 × 20.9 mm59 parts4LMIT0Miata mb 8993
v3ai
154 × 161.5 mm30 parts2LMIT0Miata mb 0105
v3ai
154 × 161.5 mm26 parts2LMIT0Miata mb 9900
v3ai
154 × 161.5 mm24 parts2LMIT0Miata mb 9495
v3ai
154 × 161.5 mm24 parts2LMIT0
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kPots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956