5 open source boards using the LMR14020

Real designs built with the LMR14020, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

The LMR14020 in open source designs

The gallery holds 5 open source boards using the LMR14020 from 4 GitHub repositories; a typical one measures about 125 × 82.4 mm and carries around 299 components.

100% use four copper layers or more, and 40% carry an open source license.

The most starred is Proteus by mck1117.

Microcontrollers on boards using the LMR14020

What boards using the LMR14020 are built for

LMR14020: common questions

Where can I find a LMR14020 reference design?

Each of the 5 boards on this page is a real design using the LMR14020. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the LMR14020?

The REF3033, 74HC2G17GW, AMS1117-3.3, LPS25HB and MCP6004T-I/ST appear in the most repositories here.

Which microcontrollers do boards using the LMR14020 use?

Most are built on STM32 (5).

How big is a typical board using the LMR14020?

The median is 125 × 82.4 mm, and 0% are two-layer designs.

What is the most popular open source board using the LMR14020?

By GitHub stars, Proteus by mck1117, with 50 stars.

Can I simulate one of these boards using the LMR14020 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part