Acid vaporizer
vad32m·acid_vaporizer·ECAD/acid_vaporizer.kicad_pcb
About the Acid vaporizer PCB
Acid vaporizer is an open source STM32 PCB design by vad32m, published on GitHub. It is a 2-layer board measuring 98 × 50 mm, with 55 components from 31 distinct parts.
Its main chip is the STM32F030F4Px, from the STM32 family. Other key parts include the OPA333xxD, AMS1117-3.3, TMP36xT, 74HC164 and MOC3063M. By type, the board carries 22 resistors, 9 capacitors, 8 ICs, 7 connectors, 4 transistors and 1 crystal.
From the project
Oxalic acid vaporizer for varroa treatment
Main components on the Acid vaporizer
Acid vaporizer bill of materials (BOM)
55 components, 31 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | OPA333xxD | SOIC-8_3.9x4.9mm_P1.27mm | U1, U4 |
| 1 | STM32F030F4Px | TSSOP-20_4.4x6.5mm_P0.65mm | U2 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U3 |
| 1 | TMP36xT | TO-92 | U5 |
| 1 | 74HC164 | SOIC-14_3.9x8.7mm_P1.27mm | U6 |
| 1 | MOC3063M | SMDIP-6_W9.53mm | U7 |
| 1 | E30281 | E30281 | U8 |
| 1 | BTA16-800BW | TO-220-3_Vertical | Q1 |
| 3 | BC817 | SOT-23 | Q2, Q3, Q4 |
| 1 | 8MHz | Crystal_HC49-4H_Vertical | Y1 |
| 3 | Screw_Terminal_01x02 | TerminalBlock_1x02_P5.00mm_Horizontal | J1, J2, J6 |
| 2 | Screw_Terminal_01x01 | K14-00(AH) | J3, J4 |
| 1 | Conn_ARM_JTAG_SWD_10 | PinHeader_2x05_P1.27mm_Vertical | J5 |
| 1 | Conn_01x02_Male | PinHeader_1x02_P2.54mm_Vertical | J7 |
| 1 | Fuse | FH5-1098 | F1 |
| 1 | HLK-PM01 | HiLink_HLK-PMxx | PS1 |
| 1 | 5K | Potentiometer_ACP_CA9-H2,5_Horizontal | RV1 |
| 1 | Ferrite_Bead | L_0603_1608Metric | FB1 |
| 5 | 100n | C_0805_2012Metric | C1, C3, C5, C7, C9 |
| 2 | 16p | C_0805_2012Metric | C2, C4 |
Show 11 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 10u | CP_Elec_4x5.3 | C6, C8 |
| 1 | 60 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1 |
| 1 | 1K | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R2 |
| 1 | 3K3 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R3 |
| 5 | 1K3 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R4, R8, R21, R22, R24 |
| 1 | 10K | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R5 |
| 1 | 1K2 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R6 |
| 1 | 15K | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R7 |
| 9 | 130 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R10, R11, R12, R13, R14, R15, R16, R17 +1 |
| 1 | 360 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R19 |
| 1 | 360 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R20 |
Acid vaporizer design files
The KiCad project lives in the vad32m/acid_vaporizer repository on GitHub; these links point at the commit this page was built from.
Acid vaporizer: common questions
What microcontroller does the Acid vaporizer use?
The Acid vaporizer is built around the STM32F030F4Px, from the STM32 family.
How big is the Acid vaporizer PCB?
The Acid vaporizer measures 98 × 50 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Acid vaporizer?
55 components, from 31 distinct parts. The full bill of materials is listed on this page.
Where can I download the Acid vaporizer design files?
From the vad32m/acid_vaporizer repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Acid vaporizer design in my own project?
The repository has no license, so all rights stay with vad32m. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Acid vaporizer without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k