Pwr
About the Pwr PCB
Pwr is an open source PCB design by vaidastal, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 77.5 × 75 mm, with 106 components from 20 distinct parts.
Other key parts include the USBLC6-2SC6, TMP102AIDRLR and SLM346CK-DG. By type, the board carries 38 capacitors, 29 resistors, 16 connectors, 11 ICs, 7 diodes and 5 transistors.
From the project
Addon for DZF-6020 vacuum UV post-curing chamber to adjust light sources and their radiant flux.
Dev NOTE: before commit, run ./kibot.sh to regenerate documentation, bom, gerbers and other assets.
UI schematics power schematics * pcb.pdf with dimensions
Main components on the Pwr
Pwr bill of materials (BOM)
106 components, 20 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | USBLC6-2SC6 | SOT-23-6 | U1, U2, U3, U4 |
| 2 | TMP102AIDRLR | SOT-563 | U5, U6 |
| 5 | SLM346CK-DG | SSO-6_6.8x4.6mm_P1.27mm_Clearance8mm | U7, U8, U9, U10, U11 |
| 5 | AON6144 | AO_DFN-8-1EP_5.55x5.2mm_P1.27mm_EP4.12x4.6mm | Q1, Q2, Q3, Q4, Q5 |
| 1 | IDC 2x8 | IDC-Header_2x08_P2.54mm_Vertical | J1 |
| 5 | XT-IN | XT30U-M | J2, J5, J8, J11, J14 |
| 5 | METER | MR30-F | J3, J6, J9, J12, J15 |
| 5 | XT-OUT | XT30U-F | J4, J7, J10, J13, J16 |
| 1 | OTP | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | VCC | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2 |
| 5 | SS34A | D_SMA | D3, D4, D5, D6, D7 |
| 17 | 100N 100n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C4, C5, C6, C7, C12 +9 |
| 1 | 220U 220u | CP_Elec_10x10.5 | C8 |
| 20 | 10U/35V 10u/35v | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C9, C10, C11, C13, C15, C16, C17, C19 +12 |
| 4 | 1K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R6 |
| 4 | 100R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R5, R7, R8 |
| 1 | 4K7 4k7 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R9 |
| 10 | 68R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R10, R11, R14, R15, R18, R19, R22, R23 +2 |
| 5 | 33R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R12, R16, R20, R24, R28 |
| 5 | 10K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R13, R17, R21, R25, R29 |
Pwr design files
The KiCad project lives in the vaidastal/DZF-6020-UV-power-addon repository on GitHub; these links point at the commit this page was built from.
- Layoutproject/pwr.kicad_pcb
- Schematicproject/pwr.kicad_sch
- BOMgen/pwr_single/bom.csv
Pwr: common questions
How big is the Pwr PCB?
The Pwr measures 77.5 × 75 mm, has 2 copper layers and is 0.8 mm thick.
How many components are on the Pwr?
106 components, from 20 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Pwr design files?
From the vaidastal/DZF-6020-UV-power-addon repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Pwr design in my own project?
Yes, under the terms of its GPL-3.0 license, which vaidastal chose for the repository.
