15 open source boards using the TMP102AIDRLR
Real designs built with the TMP102AIDRLR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Pwr
vaidastal
77.5 × 75 mm106 parts2LGPL-3.01ESP32
Integrated
hicancan
100 × 85 mm99 parts4LAGPL-3.01Mad PlantBug
Incomprehensible
30 × 126.9 mm35 parts2LMIT1STM32
Pd1180-epr
techmannih
85.9 × 85.9 mm255 parts4LNo license0ESP32
ESP32-S3-MINI-1 UU
uutzinger
20.3 × 45.7 mm53 parts2LNo license0AVR/Arduino
Kicad sensor interface board
RangeMaster370
54 × 42 mm36 parts2LNo license0STM32
Smart-Rover-Safety-Telemetry-Module
SaiSundarP
50 × 40 mm30 parts2LNo license0ESP32
Integrated power baseline
hicancan
100 × 85 mm99 parts4LAGPL-3.01ESP32
Ui
vaidastal
75 × 220 mm77 parts2LGPL-3.01RP2040/RP2350
Sensor board
TrendBit
40 × 70 mm205 parts4LGPL-3.00RP2040/RP2350
Sensor node
mohan-bee
54 × 50 mm44 parts2LNo license0ESP32
Projected negative
hicancan
100 × 85 mm99 parts4LAGPL-3.01Interface board
TrendBit
65 × 56 mm121 parts2LGPL-3.00ESP32
Candidate lv
hicancan
72 × 68 mm33 parts2LAGPL-3.01ESP32
Carbentra
hicancan
72 × 68 mm33 parts2LAGPL-3.01
How designs wire the TMP102AIDRLR
Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the TMP102AIDRLR connects to, and the resistors, capacitors and other passives placed on it.
- The V+ pin has a decoupling capacitor on 8 of 9 designs, most often 100 nF (then 10 nF).
- The SCL pin has a pull-up to 3.3V on 6 of 9 designs, most often 4.7 kΩ.
- The SDA pin has a pull-up to 3.3V on 6 of 9 designs, most often 4.7 kΩ.
- The ADD0 pin is tied to GND on 6 of 9 designs (3.3V on 2).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| SCLpin 1 | Connected to: The microcontroller 56%, a connector 44% |
|
| GNDpin 2 | Connected to: GND 100% | — |
| ADD0pin 4 | Connected to: GND 67% · 3.3V 22% | — |
| V+pin 5 | Connected to: 3.3V 78% · a signal 22% |
|
| SDApin 6 | Connected to: The microcontroller 56%, a connector 44% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Candidate lv by hicancan, Mad PlantBug by Incomprehensible, Pwr by vaidastal and Sensor node by mohan-bee.
The TMP102AIDRLR in open source designs
The gallery holds 15 open source boards using the TMP102AIDRLR from 9 GitHub repositories; a typical one measures about 72 × 70 mm and carries around 77 components.
67% are two-layer designs, the rest use four layers or more, and 67% carry an open source license.
The most starred is Pwr by vaidastal.
Parts used alongside the TMP102AIDRLR
Microcontrollers on boards using the TMP102AIDRLR
What boards using the TMP102AIDRLR are built for
TMP102AIDRLR: common questions
Where can I find a TMP102AIDRLR reference design?
Each of the 15 boards on this page is a real design using the TMP102AIDRLR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the TMP102AIDRLR V+ pin?
The V+ pin has a decoupling capacitor on 8 of 9 designs, most often 100 nF (then 10 nF). Counted from the KiCad layouts of 9 open source designs using the TMP102AIDRLR.
What pull-up resistor is used on the TMP102AIDRLR SCL pin?
The SCL pin has a pull-up to 3.3V on 6 of 9 designs, most often 4.7 kΩ. Counted from the KiCad layouts of 9 open source designs using the TMP102AIDRLR.
What pull-up resistor is used on the TMP102AIDRLR SDA pin?
The SDA pin has a pull-up to 3.3V on 6 of 9 designs, most often 4.7 kΩ. Counted from the KiCad layouts of 9 open source designs using the TMP102AIDRLR.
What parts are used alongside the TMP102AIDRLR?
The SN74LVC1G17DBVR, RP2040 and USBLC6-2SC6 appear in the most repositories here.
Which microcontrollers do boards using the TMP102AIDRLR use?
Most are built on ESP32 (7), RP2040/RP2350 (2), STM32 (2) and AVR/Arduino (1).
How big is a typical board using the TMP102AIDRLR?
The median is 72 × 70 mm, and 67% are two-layer designs.
What is the most popular open source board using the TMP102AIDRLR?
By GitHub stars, Pwr by vaidastal, with 1 stars.
Can I simulate one of these boards using the TMP102AIDRLR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.