AT2XT

Vakon84·AT2XT·board/at2xt.kicad_pcb

AT2XT PCB layout, top view — open source TI MSP430/CC board by Vakon84

About the AT2XT PCB

AT2XT is an open source TI MSP430/CC PCB design by Vakon84, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 45.7 × 39.4 mm, with 15 components from 11 distinct parts.

Its main chip is the MSP430G2211IPW14, from the TI MSP430/CC family. Other key parts include the MCP1700T-3302E/MB. By type, the board carries 5 resistors, 4 connectors, 4 capacitors and 2 ICs.

It belongs with the keyboards designs in this gallery.

From the project

This repository provides the source, schematics, and Gerber files that converts the AT-keyboard protocol to the XT keyboard protocol. As XT keyboards are expensive (seriously, type in "PC XT keyboard" or "PC 5150 keyboard" in Ebay), this provides a cheaper alternative for someone

This repository provides the source, schematics, and Gerber files that converts the AT-keyboard protocol to the XT keyboard protocol. As XT keyboards are expensive (seriously, type in "PC XT keyboard" or "PC 5150 keyboard" in Ebay), this provides a cheaper alternative for someone willing to wait for PCB and parts. This circuit supports 101-key extended keyboards using the XT protocol, but older pre-386 systems may not know how to handle extended keys. The extended keycodes are based on a document from Microsoft that includes XT keycodes for compatibility.

Main components on the AT2XT

MCP1700T-3302E/MBMSP430G2211IPW14

AT2XT bill of materials (BOM)

15 components, 11 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
MCP1700T-3302E/MB
MCP1700x-330xxMB
Microchip
U1
1
MSP430G2211IPW14
Texas Instruments
U2
1
TSW-104-14-S-S
Conn_01x04
Samtec
J1
1
KCDX-5S-N
XT
Kycon
J2
1
KCDX-5S-N
AT
Kycon
J3
1
KMDGX-6S-N
PS/2
Kycon
J4
2
0603YD225KAT2A
2.2u
Kyocera AVX
C1, C2
1
06033C112KAT2A
1.1n
Kyocera AVX
C3
1
0603YC104KAT2A
100n
Kyocera AVX
C4
1
ERJ-3GEYJ473V
47k
Panasonic
R1
4
ERJ-3GEYJ301V
300
Panasonic
R2, R3, R4, R5

AT2XT design files

The KiCad project lives in the Vakon84/AT2XT repository on GitHub; these links point at the commit this page was built from.

AT2XT: common questions

What microcontroller does the AT2XT use?

The AT2XT is built around the MSP430G2211IPW14, from the TI MSP430/CC family.

How big is the AT2XT PCB?

The AT2XT measures 45.7 × 39.4 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the AT2XT?

15 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the AT2XT design files?

From the Vakon84/AT2XT repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the AT2XT design in my own project?

Yes, under the terms of its GPL-3.0 license, which Vakon84 chose for the repository.

Can I test firmware for the AT2XT without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug TI MSP430/CC firmware against it before you order a PCB.

Similar boards