12 open source boards using the MCP1700T-3302E/MB
Real designs built with the MCP1700T-3302E/MB, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Microchip SAM
Tiny4FSK
New-England-Weather-Balloon-Society
35.1 × 76.3 mm80 parts4LCERN-OHL-W-2.096Post box usb
google
92.9 × 45 mm102 parts4LApache-2.059Microchip SAM
OpenFence
plyalex
57 × 97 mm74 parts2LGPL-3.028STM32
Stm32mp1-custom devboard
voloviq
120 × 80.6 mm194 parts4LNo license7Microchip SAM
Mtdb hw
Sierra-Lobo
90.2 × 101.1 mm296 parts4LNo license0STM32
Mesh
dholth
50 × 50 mm50 parts2LNo license0TI MSP430/CC
AT2XT
Vakon84
45.7 × 39.4 mm15 parts2LGPL-3.00Microchip SAM
Mini Ultra Pro
robot-army
25.4 × 55.9 mm57 parts2LGPL-3.04Post box usb
ep-infosec
92.9 × 45 mm102 parts4LApache-2.00Econet standalone
google
48.5 × 48 mm67 parts2LApache-2.059Raspberry Pi
Fx2 tube cartridge adapter
google
66.5 × 85.5 mm51 parts2LApache-2.059Raspberry Pi
Fx2 tube cartridge adapter
ep-infosec
66.5 × 85.5 mm51 parts2LApache-2.00
How designs wire the MCP1700T-3302E/MB
Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the MCP1700T-3302E/MB connects to, and the resistors, capacitors and other passives placed on it.
- The VO pin has a decoupling capacitor on 9 of 9 designs, most often 1 µF (then 100 nF).
- The VI pin has a decoupling capacitor on 8 of 9 designs, most often 1 µF (then 100 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1 | Connected to: GND 100% | — |
| VIpin 2 | Connected to: 5V 78% · a signal 22% |
|
| VOpin 3 | Connected to: 3.3V 78% · a signal 22% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Tiny4FSK by New-England-Weather-Balloon-Society, Econet standalone by google, OpenFence by plyalex and Stm32mp1-custom devboard by voloviq.
The MCP1700T-3302E/MB in open source designs
The gallery holds 12 open source boards using the MCP1700T-3302E/MB from 9 GitHub repositories; a typical one measures about 61.8 × 66.1 mm and carries around 71 components.
58% are two-layer designs, the rest use four layers or more, and 75% carry an open source license.
The most starred is Tiny4FSK by New-England-Weather-Balloon-Society.
Parts used alongside the MCP1700T-3302E/MB
Microcontrollers on boards using the MCP1700T-3302E/MB
What boards using the MCP1700T-3302E/MB are built for
MCP1700T-3302E/MB: common questions
Where can I find a MCP1700T-3302E/MB reference design?
Each of the 12 boards on this page is a real design using the MCP1700T-3302E/MB. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the MCP1700T-3302E/MB VO pin?
The VO pin has a decoupling capacitor on 9 of 9 designs, most often 1 µF (then 100 nF). Counted from the KiCad layouts of 9 open source designs using the MCP1700T-3302E/MB.
What decoupling capacitors do designs use on the MCP1700T-3302E/MB VI pin?
The VI pin has a decoupling capacitor on 8 of 9 designs, most often 1 µF (then 100 nF). Counted from the KiCad layouts of 9 open source designs using the MCP1700T-3302E/MB.
Which microcontrollers do boards using the MCP1700T-3302E/MB use?
Most are built on Microchip SAM (4), Raspberry Pi (2), STM32 (2) and TI MSP430/CC (1).
How big is a typical board using the MCP1700T-3302E/MB?
The median is 61.8 × 66.1 mm, and 58% are two-layer designs.
What is the most popular open source board using the MCP1700T-3302E/MB?
By GitHub stars, Tiny4FSK by New-England-Weather-Balloon-Society, with 96 stars.
Can I simulate one of these boards using the MCP1700T-3302E/MB before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.