Stm32f4 sdram baseboard
ValentiWorkLearning·stm32f4_sdram_baseboard·base_board/base_board.kicad_pcb
About the Stm32f4 sdram baseboard PCB
Stm32f4 sdram baseboard is an open source STM32 PCB design by ValentiWorkLearning, published on GitHub. It is a 6-layer board measuring 50 × 50 mm, with 55 components from 22 distinct parts.
Its main chip is the STM32F446ZEJx, from the STM32 family. Other key parts include the IS42S16400J-xT, BMI270, USB_C_Receptacle_USB2.0, 10p and LD3985M33R_SOT23. By type, the board carries 23 capacitors, 13 resistors, 7 ICs, 3 connectors, 3 jumpers and 3 diodes.
From the project
The board which is based on STM32F446ZE MCU in BGA with the external SDRAM and BMI270 IMU.
Main components on the Stm32f4 sdram baseboard
Stm32f4 sdram baseboard bill of materials (BOM)
55 components, 22 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F446ZEJx | UFBGA-144_10x10mm_Layout12x12_P0.8mm | U1 |
| 1 | IS42S16400J-xT | TSOP-II-54_22.2x10.16mm_P0.8mm | U2 |
| 1 | BMI270 | XDCR_BMI270 | U3 |
| 1 | USB_C_Receptacle_USB2.0 | USB_C_Receptacle_XKB_U262-16XN-4BVC11 | U4 |
| 2 | 10p | C_0603_1608Metric | U5, U6 |
| 1 | LD3985M33R_SOT23 | SOT-23-5 | U7 |
| 1 | Crystal_GND24 | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | Conn_ARM_JTAG_SWD_20 | PinSocket_2x10_P2.54mm_Vertical | J1 |
| 1 | Conn_01x06 | PinHeader_1x06_P2.54mm_Vertical | J2 |
| 1 | Conn_01x04 | PinHeader_1x04_P2.54mm_Vertical | J3 |
| 3 | SolderJumper_3_Open | SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2, JP3 |
| 1 | SW_Push | SW_Push_1P1T_NO_6x6mm_H9.5mm | SW1 |
| 3 | LED | LED_0603_1608Metric | D1, D2, D3 |
| 1 | INDUCTOR | L_0603_1608Metric | L1 |
| 17 | 100nF | C_0603_1608Metric | C1, C2, C3, C4, C5, C6, C7, C8 +9 |
| 2 | 2.2uF | C_0603_1608Metric | C13, C14 |
| 3 | 1uF | C_0603_1608Metric | C15, C18, C21 |
| 1 | 10nF | C_0603_1608Metric | C17 |
| 6 | 10K | R_0603_1608Metric | R1, R2, R3, R6, R7, R10 |
| 2 | 5.1k | R_0603_1608Metric | R4, R5 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 4.7K | R_0603_1608Metric | R8, R9 |
| 3 | 510 | R_0603_1608Metric | R11, R12, R13 |
Stm32f4 sdram baseboard design files
The KiCad project lives in the ValentiWorkLearning/stm32f4_sdram_baseboard repository on GitHub; these links point at the commit this page was built from.
Stm32f4 sdram baseboard: common questions
What microcontroller does the Stm32f4 sdram baseboard use?
The Stm32f4 sdram baseboard is built around the STM32F446ZEJx, from the STM32 family.
How big is the Stm32f4 sdram baseboard PCB?
The Stm32f4 sdram baseboard measures 50 × 50 mm, has 6 copper layers and is 1.5584 mm thick.
How many components are on the Stm32f4 sdram baseboard?
55 components, from 22 distinct parts. The full bill of materials is listed on this page.
Where can I download the Stm32f4 sdram baseboard design files?
From the ValentiWorkLearning/stm32f4_sdram_baseboard repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Stm32f4 sdram baseboard design in my own project?
The repository has no license, so all rights stay with ValentiWorkLearning. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Stm32f4 sdram baseboard without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k