Power board
VeeT23·SPECTRAL·hardware/power_module/power_board.kicad_pcb
About the Power board
Power board is an open source PCB design by VeeT23, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 60 × 40 mm, with 29 components from 17 distinct parts.
By type, the board carries 12 capacitors, 5 fuses, 4 connectors, 3 diodes and 3 resistors.
It belongs with the robotics & motion, sensors and displays & leds designs in this gallery.
From the project
Performance line following robot submitted to Southwork Robotics 2026
Short description of the embedded system and what it does.
SPECTRAL is a performance line following robot
- Platform: Espressif32 - MCU: ESP32-WROOM-32UE - Framework: Arduino - Build System: PlatformIO - IDE: Visual Studio Code + PlatformIO
The following CAN command IDs are used to communicate with the ODrive motor controller:
Spectral uses a 450 mAh 3s 75C lipo Running power is unknown however the circuit supports up to 10A continous. Idle power is measured to be ~140ma
Power board bill of materials (BOM)
29 components, 17 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XT30PW-F | AMASS_XT30PW-M | J0 |
| 2 | XT30PW-M | AMASS_XT30PW-M | J1, J2 |
| 1 | Conn_01x04_Socket | JST_GH_BM04B-GHS-TBT_1x04-1MP_P1.25mm_Vertical | J3 |
| 1 | 3549-2 | FUSE_3549-2 | F1 |
| 2 | Fuse-SMD | Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F2, F3 |
| 2 | Polyfuse | Fuse_2920_7451Metric_Pad2.10x5.45mm_HandSolder | F4, F5 |
| 1 | 5V | DC_Buck_Module | PM1 |
| 1 | 3V3 | DC_Buck_Module | PM2 |
| 1 | BLUE | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 1 | GREEN | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2 |
| 1 | RED | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D3 |
| 4 | 100uf 25V | CP_Radial_D5.0mm_P2.00mm | C1, C6, C7, C12 |
| 4 | 1uf | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C4, C8, C10 |
| 4 | 0.1uf | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C5, C9, C11 |
| 1 | 680 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | 220 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 1 | 100 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3 |
Power board design files
The KiCad project lives in the VeeT23/SPECTRAL repository on GitHub; these links point at the commit this page was built from.
Power board: common questions
How big is the Power board?
The Power board measures 60 × 40 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Power board?
29 components, from 17 distinct parts. The full bill of materials is listed on this page.
Where can I download the Power board design files?
From the VeeT23/SPECTRAL repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Power board design in my own project?
Yes, under the terms of its GPL-3.0 license, which VeeT23 chose for the repository.
More boards in SPECTRAL
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kDisplay eval
byrantech
52.1 × 22.6 mm12 parts4LMIT4.3kChainlinkBase
scottbez1
98.4 × 190.5 mm119 parts2LApache-2.04.2k