Sensor module
VeeT23·SPECTRAL·hardware/sensor_module/sensor_module.kicad_pcb
About the Sensor module
Sensor module is an open source PCB design by VeeT23, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 40 × 18 mm, with 20 components from 9 distinct parts.
Other key parts include the SN74LV4051APWR and SMF05C. By type, the board carries 8 transformers, 6 resistors, 3 ICs, 2 capacitors and 1 connector.
It belongs with the robotics & motion, sensors and displays & leds designs in this gallery.
From the project
Performance line following robot submitted to Southwork Robotics 2026
Short description of the embedded system and what it does.
SPECTRAL is a performance line following robot
- Platform: Espressif32 - MCU: ESP32-WROOM-32UE - Framework: Arduino - Build System: PlatformIO - IDE: Visual Studio Code + PlatformIO
The following CAN command IDs are used to communicate with the ODrive motor controller:
Spectral uses a 450 mAh 3s 75C lipo Running power is unknown however the circuit supports up to 10A continous. Idle power is measured to be ~140ma
Main components on the Sensor module
Sensor module bill of materials (BOM)
20 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | SN74LV4051APWR | PW16 | U1, U2 |
| 1 | SMF05C | SOT-363_SC-70-6_Handsoldering | U3 |
| 1 | 6p-IDC | CONN_SM06B-GHS-TB_JST | J1 |
| 8 | TCRT5000 | TCRT5000-MINI | T1, T2, T3, T4, T5, T6, T7, T8 |
| 2 | 0.1 uf | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2 |
| 3 | 4.7K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3 |
| 1 | 56 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4 |
| 1 | 100 | R_Array_Convex_4x0612 | RN1 |
| 1 | R_Pack08 | RES_EXB2HV | RN2 |
Sensor module design files
The KiCad project lives in the VeeT23/SPECTRAL repository on GitHub; these links point at the commit this page was built from.
Sensor module: common questions
How big is the Sensor module?
The Sensor module measures 40 × 18 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Sensor module?
20 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the Sensor module design files?
From the VeeT23/SPECTRAL repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Sensor module design in my own project?
Yes, under the terms of its GPL-3.0 license, which VeeT23 chose for the repository.
More boards in SPECTRAL
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kDisplay eval
byrantech
52.1 × 22.6 mm12 parts4LMIT4.3kChainlinkBase
scottbez1
98.4 × 190.5 mm119 parts2LApache-2.04.2k