Chess clock

vekkuli·chess_clock·chess_clock_pcb/chess_clock_pcb.kicad_pcb

Chess clock PCB layout, top view — open source AVR/Arduino board by vekkuli

About the Chess clock PCB

Chess clock is an open source AVR/Arduino PCB design by vekkuli, published on GitHub under the MIT license. It is a 2-layer board measuring 102 × 45 mm, with 12 components from 7 distinct parts.

Its main chip is the Sparkfun_Pro_Micro, from the AVR/Arduino family. Other key parts include the MAX7221xNG. By type, the board carries 6 switches, 2 ICs, 1 connector and 1 resistor.

It belongs with the power & battery and displays & leds designs in this gallery.

From the project

This repo contains design and fabrication files for my DIY chess clock project. The main components in the design are

This repo contains design and fabrication files for my DIY chess clock project. The main components in the design are

Two 4-digit red 7-segment displays MAX7219 display driver Pro Micro microcontroller board 3D printed enclosure and other parts 5 V power supply (e.g. PowerBoost 500C and LiPoly battery) Cut-to-shape acrylic window and tint film

The KiCad project can be found in chessclockpcb folder. The fabrication files are also included and can be used to order the PCBs directly. The fabrication files were produced according to JLCPCB requirements. Black solder mask is recommended.

Chess clock, from the project README
From the project README

Main components on the Chess clock

Chess clock bill of materials (BOM)

12 components, 7 distinct parts.

QtyPartRefs
1
MAX7221xNG
U1
1
Sparkfun_Pro_Micro
U2
1
Conn_01x03
J1
2
TDCR1060M
DS1, DS2
4
B3F-4050
S1, S2, S3, S4
2
SW_SPST
SW1, SW2
1
16k
R1

Chess clock design files

The KiCad project lives in the vekkuli/chess_clock repository on GitHub; these links point at the commit this page was built from.

Chess clock: common questions

What microcontroller does the Chess clock use?

The Chess clock is built around the Sparkfun_Pro_Micro, from the AVR/Arduino family.

How big is the Chess clock PCB?

The Chess clock measures 102 × 45 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Chess clock?

12 components, from 7 distinct parts. The full bill of materials is listed on this page.

Where can I download the Chess clock design files?

From the vekkuli/chess_clock repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Chess clock design in my own project?

Yes, under the terms of its MIT license, which vekkuli chose for the repository.

Can I test firmware for the Chess clock without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards