Vic's IO Board V1.0
About the Vic's IO Board V1.0
Vic's IO Board V1.0 is an open source PIC PCB design by vic-simkus, published on GitHub under the CERN-OHL-1.2 license. It is a 2-layer board measuring 169.3 × 66.1 mm, with 213 components from 57 distinct parts.
Its main chip is the PIC24FV32KA302-I/SO, from the PIC family. Other key parts include the MAX232ID, MIC5013YM, MCP6004T-I/SL, REF02CSZ and PTN78000WAH. By type, the board carries 89 resistors, 63 capacitors, 22 diodes, 14 LEDs, 8 connectors and 6 ICs.
From the project
Schematics for VIOBOAD Version 1.0
Main components on the Vic's IO Board V1.0
Vic's IO Board V1.0 bill of materials (BOM)
213 components, 57 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MAX232ID MAX232I | SOIC-16_3.9x9.9mm_Pitch1.27mm | U1 |
| 2 | MIC5013YM MIC5013 | SOIC-8_3.9x4.9mm_Pitch1.27mm | U2, U6 |
| 1 | MCP6004T-I/SL MCP6004_C | SOIC-14_3.9x8.7mm_Pitch1.27mm | U5 |
| 1 | REF02CSZ | SOIC-8_3.9x4.9mm_Pitch1.27mm | U7 |
| 1 | PTN78000WAH | PTN78000H | U9 |
| 2 | RFD3055LE | TO-251_IPAK_Vertical | Q1, Q2 |
| 1 | 9B-8.000MEEJ-B 8MHz | Crystal_HC49-4H_Vertical | Y1 |
| 1 | 9B-10.000MEEJ-B 10MHz | Crystal_HC49-4H_Vertical | Y2 |
| 2 | OSTTA044163 Screw_Terminal_1x04 | OSTTA044163 | J1, J7 |
| 1 | CONN_02X02_TOP_BOTTOM Conn_02x02_Top_Bottom | Pin_Header_Straight_2x02_Pitch1.27mm | J2 |
| 1 | 3-1634580-2 BOARD_COMM | D_SUB_9_RIGHT | J3 |
| 1 | OSTTA084163 24V OUTPUT | OSTTA084163 | J5 |
| 1 | OSTTA084163 SENSOR INPUT | OSTTA084163 | J6 |
| 2 | 0022052061 CONN_01X06 | Pin_Header_Angled_1x06_Pitch2.54mm | J19, J20 |
| 1 | 56000001319 24V_IN | Fuseholder_Fuse_TR5_Littlefuse-No560_No460 | F1 |
| 1 | PIC24FV32KA302-I/SO PIC24FVXXKA302 | PIC_SOIC-28 | PIC1 |
| 1 | 1825910-6 BOARD_RESET | SW_PUSH_6mm | SW1 |
| 1 | TL431BCLPR 24V_REF | TO-92_Inline_Wide | TL1 |
| 2 | TLP222A-2-C | DIP-8_W7.62mm_Socket | TLPA1, TLPB1 |
| 1 | DSPIC30F4013-30I/PT dsPIC30F4013 | TQFP-44_10x10mm_Pitch0.8mm | dsPIC1 |
Show 37 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 14 | Vf=2V | LED_0805 | LED1, LED2, LED3, LED4, LED5, LED6, LED7, LED8 +6 |
| 1 | 24V_TRIAC | TO-220_Vertical | D1 |
| 1 | SMBJ26A D_ALT | DO-214AA | D2 |
| 8 | BAS70-04-E3-08 BAS70-04 | SOT-23 | D4, D13, D14, D15, D16, D17, D18, D19 |
| 12 | D_ALT | D_SOD-323_CUSTOM | D20, D21, D22, D23, D24, D25, D26, D27 +4 |
| 1 | 12065C123KAT2A 0.012uF 50V | C_1206 | C1 |
| 2 | GCM319R71H104KA37D 0.1uF 50V | C_1206 | C2, C42 |
| 2 | GRM31CR71H105KA61L 1uF 50V | C_1206 | C3, C45 |
| 13 | CL31B106KBHNNNE 10uF 50V | C_1206 | C4, C8, C13, C17, C20, C24, C25, C29 +5 |
| 1 | GRM319R71H102KA01D 1nF 50V | C_1206 | C5 |
| 2 | CL21C180JBANNNC 18pF 50V | C_0805 | C6, C19 |
| 2 | C0805C200K5GACTU 20pF 50V | C_0805 | C7, C18 |
| 7 | CL21B103KBANNNC 0.01uF 50V | C_0805 | C10, C14, C21, C26, C30, C34, C38 |
| 8 | CL21B104KBCNNNC 0.1uF 50V | C_0805 | C11, C15, C22, C27, C31, C35, C39, C43 |
| 21 | CL21B105KBFNNNF 1uF 50V | C_0805 | C12, C16, C23, C28, C32, C36, C40, C50 +13 |
| 1 | GCM31CR71H225KA55L 2.2uF 50V | C_1206 | C44 |
| 2 | EEU-FC1H181L 180uF | CP_Radial_D8.0mm_P3.50mm | C47, C49 |
| 1 | C2012X7R1H225K125AC 2.2uF 50V | C_0805 | C51 |
| 11 | CRCW0805470RFKEA 470 1% | R_0805 | R1, R9, R15, R40, R46, R47, R48, R49 +3 |
| 1 | CRCW080523K2FKEA 23.2K 1% | R_0805 | R2 |
| 1 | RC0805FR-072K49L 2.49K 1% | R_0805 | R3 |
| 1 | CRCW0805910RFKEA 910 1% | R_0805 | R4 |
| 9 | CRCW08054K70FKEA 4.7K 1% | R_0805 | R5, R6, R7, R19, R44, R86, R87, R88 +1 |
| 6 | CRCW080510K0FKTA 10K 1% | R_0805 | R8, R10, R11, R12, R36, R37 |
| 2 | RC2012F822CS 8.2K 1% | R_0805 | R13, R38 |
| 2 | RMCF0805FT2K20 2.2K 1% | R_0805 | R14, R39 |
| 2 | RMCF0805FT24K0 24K 1% | R_0805 | R16, R41 |
| 22 | ERJ-P06F1000V 100 1% | R_0805 | R17, R42, R53, R54, R55, R56, R57, R58 +14 |
| 2 | ERJ-6DQF3R0V 3 1% | R_0805 | R18, R43 |
| 4 | RC2012F822CS 910 1% | R_0805 | R20, R22, R24, R28 |
| 4 | CRCW0805910RFKEA 8.2K 1% | R_0805 | R21, R23, R26, R30 |
| 4 | CMF55250R00BHEK 250 0.1% | R_Axial_DIN0309_L9.0mm_D3.2mm_P2.54mm_Vertical | R25, R27, R29, R31 |
| 4 | ERJ-PB6B1001V 1K 0.1% | R_0805 | R32, R33, R34, R35 |
| 1 | CRCW080521K0FKEA 21K 1% | R_0805 | R45 |
| 1 | CRM2512-FX-1000ELF 100 1% | R_2512 | R65 |
| 4 | CRCW08050000Z0EBC 0 1% | R_0805 | R66, R67, R68, R69 |
| 8 | CRCW08051K00FKEA 1K 1% | R_0805 | R78, R79, R80, R81, R82, R83, R84, R85 |
Vic's IO Board V1.0 design files
The KiCad project lives in the vic-simkus/VIOBOARD_V1_Schematics repository on GitHub; these links point at the commit this page was built from.
Vic's IO Board V1.0: common questions
What microcontroller does the Vic's IO Board V1.0 use?
The Vic's IO Board V1.0 is built around the PIC24FV32KA302-I/SO, from the PIC family.
How big is the Vic's IO Board V1.0?
The Vic's IO Board V1.0 measures 169.3 × 66.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Vic's IO Board V1.0?
213 components, from 57 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Vic's IO Board V1.0 design files?
From the vic-simkus/VIOBOARD_V1_Schematics repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Vic's IO Board V1.0 design in my own project?
Yes, under the terms of its CERN-OHL-1.2 license, which vic-simkus chose for the repository.
Can I test firmware for the Vic's IO Board V1.0 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug PIC firmware against it before you order a PCB.
More boards in VIOBOARD_V1_Schematics
Similar boards
PICPslab hardware
fossasia
99 × 53.3 mm187 parts4LApache-2.01.7k
PICMicro 8088
skiselev
152.4 × 101.6 mm71 partsGPL-3.0414
PICGB-CARTPP-DIY
Gekkio
100 × 100 mm22 parts2LCC-BY-4.0376
PICGB-MBCTEST
51.4 × 61 mm32 parts2LCC-BY-4.0376
PICGB-BENCH-G1
100 × 100 mm98 parts4LCC-BY-4.0376
PICGB-LIVE32
51.4 × 61 mm46 parts4LCC-BY-4.0376