11 open source boards using the MCP6004T-I/SL

Real designs built with the MCP6004T-I/SL, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

11 boardsClear filters|Most starred

How designs wire the MCP6004T-I/SL

Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the MCP6004T-I/SL connects to, and the resistors, capacitors and other passives placed on it.

  • Pin 1 has a series resistor on 5 of 7 designs, most often 100 Ω (then 220 Ω).
  • The V- pin is tied to GND on 6 of 6 designs.
  • The - pins have a series resistor on 4 of 7 designs, most often 100 Ω (then 220 Ω).
  • The + pins have a capacitor to GND on 4 of 7 designs, most often 100 nF (then 47 nF).
Pin 1Connected to: The microcontroller 29%
  • Series resistor on 71% · 100 Ω (2), 220 Ω (1), 33 kΩ (1)
-pin 2, 6, 9, 13Connected to: Signal 96%
  • Series resistor on 57% · 100 Ω (8), 220 Ω (4), 33 kΩ (4)
+pin 3, 5, 10, 12Connected to: Signal 85% · GND 15%
  • Capacitor to GND on 57% · 100 nF (6), 47 nF (4), 1 µF (3)
  • Series resistor on 57% · 680 kΩ (4), 330 kΩ (4), 1 kΩ (4)
V+pin 4Connected to: 5V 86%
Pin 7Connected to: The microcontroller 33%
  • Series resistor on 67% · 100 Ω (2), 220 Ω (1), 33 kΩ (1)
  • Series capacitor on 33% · 220 pF (1), 100 nF (1)
Pin 8Connected to: The microcontroller 33%
  • Series resistor on 67% · 100 Ω (2), 220 Ω (1), 33 kΩ (1)
  • Series capacitor on 33% · 220 pF (1), 100 nF (1)
V-pin 11Connected to: GND 100%
Pin 14Connected to: The microcontroller 33%
  • Series resistor on 67% · 100 Ω (2), 220 Ω (1), 33 kΩ (1)
  • Series capacitor on 33% · 220 pF (1), 100 nF (1)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include TBB by formulaslug, Pi mini zero adapter by damercer, TC SENSOR BUFFER REVA by hankenken and AEM-60DC8 V1.2 by akhemka-cmd.

The MCP6004T-I/SL in open source designs

The gallery holds 11 open source boards using the MCP6004T-I/SL from 7 GitHub repositories; a typical one measures about 92.5 × 66.1 mm and carries around 138 components.

55% use four copper layers or more, and 36% carry an open source license.

The most starred is VCU by formulaslug.

Parts used alongside the MCP6004T-I/SL

Microcontrollers on boards using the MCP6004T-I/SL

What boards using the MCP6004T-I/SL are built for

MCP6004T-I/SL: common questions

Where can I find a MCP6004T-I/SL reference design?

Each of the 11 boards on this page is a real design using the MCP6004T-I/SL. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the MCP6004T-I/SL pin 1?

Pin 1 has a series resistor on 5 of 7 designs, most often 100 Ω (then 220 Ω). Counted from the KiCad layouts of 7 open source designs using the MCP6004T-I/SL.

How is the MCP6004T-I/SL V- pin connected?

The V- pin is tied to GND on 6 of 6 designs. Counted from the KiCad layouts of 7 open source designs using the MCP6004T-I/SL.

What resistor goes on the MCP6004T-I/SL - pin?

The - pins have a series resistor on 4 of 7 designs, most often 100 Ω (then 220 Ω). Counted from the KiCad layouts of 7 open source designs using the MCP6004T-I/SL.

Which microcontrollers do boards using the MCP6004T-I/SL use?

Most are built on STM32 (4), PIC (2), ESP32 (1) and NXP (1).

How big is a typical board using the MCP6004T-I/SL?

The median is 92.5 × 66.1 mm, and 45% are two-layer designs.

What is the most popular open source board using the MCP6004T-I/SL?

By GitHub stars, VCU by formulaslug, with 7 stars.

Can I simulate one of these boards using the MCP6004T-I/SL before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part