Rf pa 300w

Vickyrrrrrr·ClassD_RF_PA_300W_13p56MHz·kicad/rf_pa_300w.kicad_pcb

Rf pa 300w PCB layout, top view — open source board by Vickyrrrrrr

About the Rf pa 300w PCB

Rf pa 300w is an open source PCB design by Vickyrrrrrr, published on GitHub. It is a 2-layer board measuring 80 × 50 mm, with 21 components from 17 distinct parts.

Other key parts include the IR2181S. By type, the board carries 6 capacitors, 4 connectors, 3 diodes, 3 resistors, 2 transistors and 2 inductors.

It belongs with the audio designs in this gallery.

From the project

For hackerfab lithography machine RF plasma source.

For hackerfab lithography machine RF plasma source.

A 300W, 13.56MHz Class-D RF power amplifier based on the El-Hamamsy half-bridge topology. Designed and simulated in Cadence Spectre (305W output, 83.7% efficiency), then translated to a KiCAD 10 PCB project for fabrication.

See docs/kicadbuildreport.md for detailed results.

The amplifier was simulated in Cadence Spectre 14.1 using a real IRF540 Level-3 SPICE model with bootstrap gate drive:

Main components on the Rf pa 300w

IR2181S

Rf pa 300w bill of materials (BOM)

21 components, 17 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
IR2181S
U1
2
IRF540
Q1, Q2
1
Vdd 72.5V
J1
1
SMA 50ohm
J2
1
VCC 12V
J3
1
PWM IN
J4
1
UF4007
D1
2
1N5819
D2, D3
1
300nH
L1
1
130nH
L2
1
100uF
C1
2
0.1uF
C2, C3
1
220nF
C4
1
470pF
C5
1
1nF
C6
2
2.2
R1, R2
1
2.55
R3

Rf pa 300w design files

The KiCad project lives in the Vickyrrrrrr/ClassD_RF_PA_300W_13p56MHz repository on GitHub; these links point at the commit this page was built from.

Rf pa 300w: common questions

How big is the Rf pa 300w PCB?

The Rf pa 300w measures 80 × 50 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Rf pa 300w?

21 components, from 17 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Rf pa 300w design files?

From the Vickyrrrrrr/ClassD_RF_PA_300W_13p56MHz repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Rf pa 300w design in my own project?

The repository has no license, so all rights stay with Vickyrrrrrr. Use it as a reference, and ask the author before reusing the design.

More boards in ClassD_RF_PA_300W_13p56MHz

Similar boards