RePower

Vihaan6119·RePower·PCB/RePower.kicad_pcb

RePower PCB layout, top view — open source board by Vihaan6119

About the RePower PCB

RePower is an open source PCB design by Vihaan6119, published on GitHub. It is a 2-layer board measuring 80.7 × 25 mm, with 9 components from 9 distinct parts.

Other key parts include the LM2576HVT-ADJ. By type, the board carries 2 connectors, 2 capacitors, 2 resistors, 1 IC, 1 diode and 1 inductor.

It belongs with the power & battery and audio designs in this gallery.

From the project

it takes power from a wall adapter via usb-c/dc input and uses a through-hole step down buck regulator (LM2576/LM2596) to convert it to a steady 3.9v dc directly into the speaker's mainboard. it also includes a big 1000uF smoothing capacitor so the speaker can handle heavy bass without rebooting, making the speaker run permanently off wall power

i am made a custom power supply pcb called RePower. it takes power from a wall adapter via usb-c/dc input and uses a through-hole step down buck regulator to convert it to a steady 3.9v dc directly into the speaker's mainboard. it also includes a big 1000uF smoothing capacitor so the speaker can handle heavy bass without rebooting, making the speaker run permanently on wall power

RePower, from the project README
From the project README

Main components on the RePower

LM2576HVT-ADJ

RePower bill of materials (BOM)

9 components, 9 distinct parts.

QtyPartRefs
1
LM2576HVT-ADJ
U1
1
input
J1
1
output
J2
1
1N5822
D1
1
100uH
L1
1
100uF
C1
1
1000uF
C2
1
1k
R1
1
2.2k
R2

RePower design files

The KiCad project lives in the Vihaan6119/RePower repository on GitHub; these links point at the commit this page was built from.

RePower: common questions

How big is the RePower PCB?

The RePower measures 80.7 × 25 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the RePower?

9 components, from 9 distinct parts. The full bill of materials is listed on this page.

Where can I download the RePower design files?

From the Vihaan6119/RePower repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the RePower design in my own project?

The repository has no license, so all rights stay with Vihaan6119. Use it as a reference, and ask the author before reusing the design.

Similar boards