HardLabs

FPV Receiver Diversity Pro Part1/2

Virtex7·RX5808·Platine/rx5808_4button.kicad_pcb

FPV Receiver Diversity Pro Part1/2 PCB layout, top view — open source AVR/Arduino board by Virtex7

About the FPV Receiver Diversity Pro Part1/2 PCB

FPV Receiver Diversity Pro Part1/2 is an open source AVR/Arduino PCB design by Virtex7, published on GitHub. It is a 2-layer board measuring 50 × 29.5 mm, with 53 components from 31 distinct parts.

Its main chip is the ATMEGA328-A, from the AVR/Arduino family. Other key parts include the TPS62160, RX5808, sn74lvc1g3157 and MCPL3-BC-V. By type, the board carries 22 resistors, 14 capacitors, 5 ICs, 5 diodes, 3 connectors and 1 crystal.

From the project

FPV Empfänger mit OSD und vielen Funktionen

Software basierend auf dem Projekt von Marko Hoepken https://code.google.com/p/rx5808-pro/wiki/Overview

sowie inzwischen dem Code des rx5808-pro-diversity von hier: https://github.com/sheaivey/rx5808-pro-diversity

Es wurden diese Platinen entworfen, um einen vielseitigen FPV-Empfänger bauen zu können

Diese Doku beschränkt sich auf die Hardware, weil die Software schon bei sheaivey sehr schön dokumentiert ist.

Main components on the FPV Receiver Diversity Pro Part1/2

ATMEGA328-ATPS62160RX5808sn74lvc1g3157MCPL3-BC-V

FPV Receiver Diversity Pro Part1/2 bill of materials (BOM)

53 components, 31 distinct parts.

QtyPartRefs
1
ATMEGA328-A
IC1
1
TPS62160
U1
1
RX5808
U2
1
sn74lvc1g3157
U3
1
MCPL3-BC-V
U4
1
16 MHz
Y1
1
CONN_01X04
P1
1
CONN_01X05
P2
1
CONN_01X04
P6
1
SMA_EDGE
SMA_E1
1
BUZ
SP1
1
B 140 F
D1
1
P6SMB 18A SMD
D2
2
grün
D3, D4
1
IR_EMITTER
D5
1
2,2µH 1,5A
L1
10
100n
C1, C2, C3, C4, C6, C8, C9, C11 +2
1
10µ
C5
2
22µ
C7, C10
1
4,7u
C12
Show 11 more
QtyPartRefs
3
100k
R1, R2, R3
9
1k
R4, R5, R6, R7, R13, R14, R15, R17 +1
1
10k
R8
2
220
R9, R12
1
680k
R10
1
1M
R11
1
15k
R16
1
100
R18
1
10
R20
1
brücke
R21
1
150k
R22

FPV Receiver Diversity Pro Part1/2 design files

The KiCad project lives in the Virtex7/RX5808 repository on GitHub; these links point at the commit this page was built from.

FPV Receiver Diversity Pro Part1/2: common questions

What microcontroller does the FPV Receiver Diversity Pro Part1/2 use?

The FPV Receiver Diversity Pro Part1/2 is built around the ATMEGA328-A, from the AVR/Arduino family.

How big is the FPV Receiver Diversity Pro Part1/2 PCB?

The FPV Receiver Diversity Pro Part1/2 measures 50 × 29.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the FPV Receiver Diversity Pro Part1/2?

53 components, from 31 distinct parts. The full bill of materials is listed on this page.

Where can I download the FPV Receiver Diversity Pro Part1/2 design files?

From the Virtex7/RX5808 repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the FPV Receiver Diversity Pro Part1/2 design in my own project?

The repository has no license, so all rights stay with Virtex7. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the FPV Receiver Diversity Pro Part1/2 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in RX5808

Similar boards