Isolation transformer
virtual-machinist·isolation-transformer
About the Isolation transformer PCB
Isolation transformer is an open source PCB design by virtual-machinist, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 152.1 × 85.4 mm, with 51 components from 22 distinct parts.
Other key parts include the HEF4093B, NE555, DD4012SB_5V and 7400. By type, the board carries 13 resistors, 10 connectors, 6 ICs, 6 transistors, 6 relays and 6 diodes.
From the project
DIY isolation transformer project
Control circuitry for a 2600 VA isolation transformer. My first electronics project in KiCad.
As you might have guessed it, the primary reason I did this project was to learn the ropes of modern EDA.
Prior to using KiCad my circuit design consisted of:
1. Designing the actual circuit on paper or in a circuit editor tool similar to sPlan. 2. Simulating the circuit if possible. A long time ago I used Electronics Workbench (EWB), but I had trouble running it on my system recently, so now I use the (in-)famous Circuit Simulator Applet. 3. Buying some parts to build a prototype on a breadboard.…

Main components on the Isolation transformer
Isolation transformer bill of materials (BOM)
51 components, 22 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | HEF4093B | DIP-14_W7.62mm_Socket_LongPads | U1 |
| 3 | NE555 | DIP-8_W7.62mm_Socket_LongPads | U2, U5, U6 |
| 1 | DD4012SB_5V | TO-220-3_Horizontal_TabDown_NoHole | U3 |
| 1 | 7400 | DIP-14_W7.62mm_Socket_LongPads | U4 |
| 6 | BC546 | TO-92_HandSolder | Q1, Q2, Q3, Q4, Q5, Q6 |
| 1 | MODE | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J1 |
| 7 | MG950-9.5 | TerminalBlock_CixiMeigan_MG950-9.5-2_P9.52mm | J2, J3, J4, J5, J6, J8, J9 |
| 2 | PWR | TerminalBlock_bornier-2_P5.08mm_no_line | J7, J10 |
| 4 | G2R-1-E-12VDC | Relay_SPDT_Omron_G2R-1-E | K1, K2, K3, K4 |
| 2 | FTR-K1CK012W | Relay_SPDT_Fujitsu_FTR-K1C | K5, K6 |
| 6 | 1N4007 | D_DO-41_SOD81_P10.16mm_Horizontal | D1, D2, D3, D4, D5, D6 |
| 1 | 1uF | CP_Radial_Tantal_D4.5mm_P2.50mm | C1 |
| 3 | 47uF | CP_Radial_Tantal_D5.0mm_P5.00mm | C2, C3, C4 |
| 1 | 82k | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R1 |
| 3 | 3k | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R2, R3, R4 |
| 1 | 18k | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R5 |
| 1 | 47k | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R6 |
| 1 | 10 | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R7 |
| 2 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R8, R9 |
| 2 | 9k1 | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R10, R12 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R11 |
| 1 | 22k | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R13 |
Isolation transformer design files
The KiCad project lives in the virtual-machinist/isolation-transformer repository on GitHub; these links point at the commit this page was built from.
Isolation transformer: common questions
How big is the Isolation transformer PCB?
The Isolation transformer measures 152.1 × 85.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Isolation transformer?
51 components, from 22 distinct parts. The full bill of materials is listed on this page.
Where can I download the Isolation transformer design files?
From the virtual-machinist/isolation-transformer repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Isolation transformer design in my own project?
Yes, under the terms of its CC-BY-SA-4.0 license, which virtual-machinist chose for the repository.