17 open source boards using the HEF4093B
Real designs built with the HEF4093B, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
8Q
Spooky-Manufacturing
482.5 × 711 mm157 parts2LGPL-3.0101AVR/Arduino
Mycelium
microresearch
74.5 × 83.7 mm126 parts2LGPL-3.05Accumulator Board
formulaslug
127 × 91.5 mm102 parts2LNo license5BabyOdes
oficinadesonido
60.1 × 109.8 mm91 parts2LGPL-3.03CosmicRayDetector
RobertGawron
140 × 80 mm23 parts2LMIT3BSPD +
formulaslug
160 × 124.7 mm137 parts2LNo license2ADSR EG
xdylanm
29 × 100 mm86 parts4LMIT0Isolation transformer
virtual-machinist
152.1 × 85.4 mm51 parts2LCC-BY-SA-4.00- schematic only · 99 partsPIC
Z99-development
Jurrie
99 partsMIT0 Synclap
Bad-Dog-Designs
71 × 108 mm101 parts2LGPL-2.014AVR/Arduino
Mycleium pcb before thereminchange
microresearch
74.5 × 83.7 mm126 parts2LGPL-3.05Accumulator Board
formulaslug
139.7 × 88.9 mm105 parts2LNo license24093
matbutom
54.7 × 32 mm12 parts2LNo license0Mycelium pcb radio
microresearch
74.5 × 83.7 mm62 parts2LGPL-3.05ServicetastaturWeissFake
stonedDiscord
153.7 × 67.3 mm43 parts2LBSD-2-Clause5Parakeets
apaleslimghost
76.2 × 94 mm31 parts2LMIT53-phase lfo
tpcarlson
30 × 128.5 mm70 parts2LNo license106
How designs wire the HEF4093B
Read from the KiCad layouts of 13 open source designs, one per repository: what each pin of the HEF4093B connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 8 of 13 designs, most often 100 nF.
- Pin 10 is left unconnected on 8 of 13 designs (a signal on 5).
- Pin 2 has a capacitor to GND on 6 of 13 designs, most often 330 pF (then 220 nF).
- Pin 3 has a series resistor on 6 of 13 designs, most often 10 kΩ (then 1 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 1 | Connected to: A connector 23% · VCC 23% |
|
| Pin 2 | Connected to: A connector 23% · not connected 23% |
|
| Pin 3 | Connected to: Signal 85% · not connected 15% |
|
| GNDpin 7 | Connected to: GND 92% | — |
| Pin 10 | Connected to: Not connected 62% · a signal 38% | — |
| VCCpin 14 | Connected to: 5V 85% |
|
8 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include 3-phase lfo by tpcarlson, 8Q by Spooky-Manufacturing, Synclap by Bad-Dog-Designs and Parakeets by apaleslimghost.
The HEF4093B in open source designs
The gallery holds 17 open source boards using the HEF4093B from 14 GitHub repositories; a typical one measures about 75.4 × 90.2 mm and carries around 91 components.
94% are two-layer designs, the rest use four layers or more, and 71% carry an open source license.
The most starred is 3-phase lfo by tpcarlson.
Parts used alongside the HEF4093B
Microcontrollers on boards using the HEF4093B
What boards using the HEF4093B are built for
HEF4093B: common questions
Where can I find a HEF4093B reference design?
Each of the 17 boards on this page is a real design using the HEF4093B. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the HEF4093B VCC pin?
The VCC pin has a decoupling capacitor on 8 of 13 designs, most often 100 nF. Counted from the KiCad layouts of 13 open source designs using the HEF4093B.
How is the HEF4093B pin 10 connected?
Pin 10 is left unconnected on 8 of 13 designs (a signal on 5). Counted from the KiCad layouts of 13 open source designs using the HEF4093B.
How is the HEF4093B pin 2 connected?
Pin 2 has a capacitor to GND on 6 of 13 designs, most often 330 pF (then 220 nF). Counted from the KiCad layouts of 13 open source designs using the HEF4093B.
What parts are used alongside the HEF4093B?
The TL074, 4017, ISO1050DUB, LTC6820 and MCP6004 appear in the most repositories here.
Which microcontrollers do boards using the HEF4093B use?
Most are built on AVR/Arduino (2), PIC (1) and STM32 (1).
How big is a typical board using the HEF4093B?
The median is 75.4 × 90.2 mm, and 94% are two-layer designs.
What is the most popular open source board using the HEF4093B?
By GitHub stars, 3-phase lfo by tpcarlson, with 106 stars.
Can I simulate one of these boards using the HEF4093B before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.