RetroPad Project
vishalgorain-softage·RetroPad_Project-pcb
About the RetroPad Project PCB
RetroPad Project is an open source PCB design by vishalgorain-softage, published on GitHub. It is a board, with 31 components from 10 distinct parts.
Other key parts include the U1, 10k, J1 and J2. By type, the board carries 12 ICs, 8 resistors, 1 diode and 1 capacitor.
It belongs with the retro computing designs in this gallery.
From the project
Each component of the RetroPad circuit is designed and interconnected using Python-based scripting with the SKiDL framework, followed by PCB realization in KiCad. The workflow is structured to ensure modular design, clear connectivity definition, and reproducible hardware output.
Each component of the RetroPad circuit is designed and interconnected using Python-based scripting with the SKiDL framework, followed by PCB realization in KiCad. The workflow is structured to ensure modular design, clear connectivity definition, and reproducible hardware output.
Each input element (button) is implemented using a reusable Python function that defines its electrical behavior. Every button consists of a push switch and a pull-down resistor (10kΩ), ensuring stable signal levels. Components are instantiated programmatically, allowing consistent and scalable circuit generation…
Main components on the RetroPad Project
RetroPad Project bill of materials (BOM)
31 components, 10 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | U1 | SOIC-14_3.9x8.7mm_P1.27mm | U1 |
| 9 | 10k | R_0805_2012Metric | U4, U6, U8, U10, U12, U14, U16, U18 +1 |
| 1 | J1 | DSUB-9_Male_EdgeMount_P2.77mm | U28 |
| 1 | J2 | PinSocket_1x06_P2.54mm_Horizontal | U29 |
| 9 | SW | SW_SPST_TL3342 | BTN1, BTN2, BTN3, DOWN1, JUMP1, LEFT1, RAPID1, RIGHT1 +1 |
| 1 | LED | LED_D3.0mm | D1 |
| 1 | 0.1uF | CP_Elec_4x4.5 | C1 |
| 2 | 1k | R_0805_2012Metric | R1, R2 |
| 1 | 330 | R_0805_2012Metric | R3 |
| 5 | 0 | R_0805_2012Metric | R7, R8, R9, R10, R11 |
RetroPad Project design files
The KiCad project lives in the vishalgorain-softage/RetroPad_Project-pcb repository on GitHub; these links point at the commit this page was built from.
- Netlistmain.net
RetroPad Project: common questions
How many components are on the RetroPad Project?
31 components, from 10 distinct parts. The full bill of materials is listed on this page.
Where can I download the RetroPad Project design files?
From the vishalgorain-softage/RetroPad_Project-pcb repository on GitHub, which has a netlist; the links under Design files point to each one.
Can I use the RetroPad Project design in my own project?
The repository has no license, so all rights stay with vishalgorain-softage. Use it as a reference, and ask the author before reusing the design.
Similar boards
Expansion Card Retrofit
FrameworkComputer
24 × 27.3 mm5 parts2LCC-BY-4.01.1kRgb to hdmi
hoglet67
77 × 97 mm67 parts2LGPL-3.01.0kBuffer
hoglet67
53.9 × 23.2 mm13 parts2LGPL-3.01.0kX1
hoglet67
121.9 × 81.3 mm51 parts2LGPL-3.01.0kAmiga External
hoglet67
21.9 × 76.7 mm6 parts2LGPL-3.01.0kVideoslotadapter
hoglet67
152 × 57.6 mm13 parts2LGPL-3.01.0k