Orange

vivaanchauhan78·Orange

Orange PCB layout, top view — open source RP2040/RP2350 board by vivaanchauhan78

About the Orange PCB

Orange is an open source RP2040/RP2350 PCB design by vivaanchauhan78, published on GitHub. It is a 2-layer board measuring 59 × 21.2 mm, with 5 components from 3 distinct parts.

Its main chip is the XIAO-RP2040-DIP, from the RP2040/RP2350 family. By type, the board carries 2 switches, 2 diodes and 1 IC.

Orange, from the project README
From the project README

Main components on the Orange

Orange bill of materials (BOM)

5 components, 3 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
XIAO-RP2040-DIP
U1
2
SW_Push
SW1, SW2
2
SK6812MINI
D1, D3

Orange design files

The KiCad project lives in the vivaanchauhan78/Orange repository on GitHub; these links point at the commit this page was built from.

Orange: common questions

What microcontroller does the Orange use?

The Orange is built around the XIAO-RP2040-DIP, from the RP2040/RP2350 family.

How big is the Orange PCB?

The Orange measures 59 × 21.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Orange?

5 components, from 3 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Orange design files?

From the vivaanchauhan78/Orange repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Orange design in my own project?

The repository has no license, so all rights stay with vivaanchauhan78. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Orange without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards