VIGIL Headband v1.0
vkalipat·VIGIL_Headband_v1.0·hardware/kicad/VIGIL_v1.0.kicad_pcb
About the VIGIL Headband v1.0 PCB
VIGIL Headband v1.0 is an open source Nordic nRF PCB design by vkalipat, published on GitHub under the CERN-OHL-P-2.0 license. It is a 2-layer board measuring 185 × 35 mm, with 20 components from 16 distinct parts.
Its main chip is the C190794, from the Nordic nRF family. Other key parts include the C15134, C699536, C5656610, C408833 and C2071859. By type, the board carries 7 ICs, 6 capacitors, 2 connectors, 2 resistors, 1 crystal and 1 diode.
It belongs with the iot & wireless, power & battery and sensors designs in this gallery.
From the project
Low-cost continuous patient monitoring headband. ~$30 BOM.
Low-cost continuous patient monitoring headband. ~$30 BOM.
Monitors 4 vital signs simultaneously from a single flex PCB worn on the forehead:
Data transmits over BLE 5.0 (nRF52840) to a phone/tablet.
The original BOM had several wrong LCSC part numbers. Use the corrected files:
JLCPCB could not assemble these due to footprint mismatches or pad size issues:
See docs/SOLDERINGGUIDE.md` for detailed instructions.
Main components on the VIGIL Headband v1.0
VIGIL Headband v1.0 bill of materials (BOM)
20 components, 16 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | C190794 nRF52840-QIAA | QFN-73-1EP_7x7mm | U1 |
| 1 | C15134 LIS3DHTR | LGA-16_3x3mm | U2 |
| 1 | C699536 TMP117AIDRVR | WSON-6_2x2mm | U3 |
| 1 | C5656610 ICS-43434 [HAND SOLDER] | LGA-6_3.5x2.65mm | U4 |
| 1 | C408833 AD8606ARMZ | MSOP-8_3x3mm | U5 |
| 1 | C2071859 TPS62840DLCR [HAND SOLDER] | WSON-8_2x2mm | U6 |
| 1 | C140288 BQ24072RGTR | QFN-16_3x3mm | U7 |
| 1 | C32346 32.768kHz [HAND SOLDER] | Crystal_SMD_2012 | Y1 |
| 1 | C165948 USB_C [HAND SOLDER] | USB_C_GCT_USB4105 | J1 |
| 1 | C131337 BAT_JST_PH [HAND SOLDER] | JST_PH_B2B-PH-K | J2 |
| 1 | C965794 LED_GRN | LED_0402 | D1 |
| 1 | C107322 2.2uH | L_0805 | L1 |
| 2 | C1525 100nF | C_0402 | C1, C2 |
| 2 | C19702 10uF | C_0805 | C3, C4 |
| 2 | C1547 12pF | C_0402 | C5, C6 |
| 2 | C25900 4.7k | R_0402 | R1, R2 |
VIGIL Headband v1.0 design files
The KiCad project lives in the vkalipat/VIGIL_Headband_v1.0 repository on GitHub; these links point at the commit this page was built from.
VIGIL Headband v1.0: common questions
What microcontroller does the VIGIL Headband v1.0 use?
The VIGIL Headband v1.0 is built around the C190794, from the Nordic nRF family.
How big is the VIGIL Headband v1.0 PCB?
The VIGIL Headband v1.0 measures 185 × 35 mm, has 2 copper layers and is 0.11 mm thick.
How many components are on the VIGIL Headband v1.0?
20 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the VIGIL Headband v1.0 design files?
From the vkalipat/VIGIL_Headband_v1.0 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the VIGIL Headband v1.0 design in my own project?
Yes, under the terms of its CERN-OHL-P-2.0 license, which vkalipat chose for the repository.
Can I test firmware for the VIGIL Headband v1.0 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Nordic nRF firmware against it before you order a PCB.
Similar boards
Nordic nRF
Keyboard
byrantech
262.5 × 109.6 mm206 parts2LMIT4.3kNordic nRF
TOTEM
GEIGEIGEIST
258.8 × 94.4 mm85 parts2LCERN-OHL-P-2.02.0kNordic nRF
Pixl.js
solosky
40 × 23 mm45 parts4LGPL-2.01.4kNordic nRF
Management
dennisss
101 × 31.5 mm50 parts2LApache-2.0381Nordic nRF
Board
dennisss
363 × 128 mm420 parts4LApache-2.0381Nordic nRF
Board hl15-latest
dennisss
61 × 37 mm14 parts2LApache-2.0381