Sidecar-TI

VonHoltenCodes·Sidecar-TI·pcb/sidecarti.kicad_pcb

Sidecar-TI PCB layout, top view — open source ESP32 board by VonHoltenCodes

About the Sidecar-TI PCB

Sidecar-TI is an open source ESP32 PCB design by VonHoltenCodes, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 72 × 22 mm, with 8 components from 4 distinct parts.

Its main chip is the MOUDLE-SEEEDUINO-XIAO-ESP32C3, from the ESP32 family. By type, the board carries 4 resistors, 2 transistors, 1 IC and 1 connector.

It belongs with the iot & wireless designs in this gallery.

From the project

Personal offline-first AI calculator: TI-84 Plus SE + ESP32-C3 link-port WiFi/AI mod. Rebranded from chromalock/TI-32.

A personal, offline-first smart-calculator build for the TI-84 Plus Silver Edition: an ESP32-C3 rides the calculator's link port to add WiFi and an AI chat/assist interface. This is a hobby electronics build, not a tool for exam use.

Based on and rebranded from chromalock/TI-32 (GPL-3.0), which this repo is not a fork of — see LICENSE. An unmodified reference copy of upstream lives in upstream/ (read-only, kept for diffing/reference — don't work directly in that folder).

Main components on the Sidecar-TI

Sidecar-TI bill of materials (BOM)

8 components, 4 distinct parts.

QtyPartRefs
1
MOUDLE-SEEEDUINO-XIAO-ESP32C3
U1
2
MMBF170
Q1, Q2
1
Conn_01x04
J1
4
R
R1, R2, R3, R4

Sidecar-TI design files

The KiCad project lives in the VonHoltenCodes/Sidecar-TI repository on GitHub; these links point at the commit this page was built from.

Sidecar-TI: common questions

What microcontroller does the Sidecar-TI use?

The Sidecar-TI is built around the MOUDLE-SEEEDUINO-XIAO-ESP32C3, from the ESP32 family.

How big is the Sidecar-TI PCB?

The Sidecar-TI measures 72 × 22 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Sidecar-TI?

8 components, from 4 distinct parts. The full bill of materials is listed on this page.

Where can I download the Sidecar-TI design files?

From the VonHoltenCodes/Sidecar-TI repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Sidecar-TI design in my own project?

Yes, under the terms of its GPL-3.0 license, which VonHoltenCodes chose for the repository.

Can I test firmware for the Sidecar-TI without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards