40 to WP27D-P050VA3
About the 40 to WP27D-P050VA3 PCB
40 to WP27D-P050VA3 is an open source PCB design by vroland, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 40 × 30 mm, with 3 components from 3 distinct parts.
Other key parts include the C841192. By type, the board carries 1 IC, 1 connector and 1 resistor.
It belongs with the displays & leds designs in this gallery.
From the project
Hardware design files for EPDiy: https://github.com/vroland/epdiy.
This is a very simple adapter in case you want to test the 5.2 inch displays. Just use a 40 pin forward cable and respect the 1 - 50 indicators in the Silk to match the target display pins that are printed. This is a rule that should be followed before plugging any display to a controller
Main components on the 40 to WP27D-P050VA3
40 to WP27D-P050VA3 bill of materials (BOM)
3 components, 3 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | C841192 ED078KH6 | Hirose_FH12-40S-0.5SH_mirrored | U1 |
| 1 | WP27D-S050VA3-R15000 | CONN-SMD_50P-P0.35_WP27D-S050VA3 | CN1 |
| 1 | C25804 10K | R_0603_1608Metric | R1 |
40 to WP27D-P050VA3 design files
The KiCad project lives in the vroland/epdiy-hardware repository on GitHub; these links point at the commit this page was built from.
40 to WP27D-P050VA3: common questions
How big is the 40 to WP27D-P050VA3 PCB?
The 40 to WP27D-P050VA3 measures 40 × 30 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the 40 to WP27D-P050VA3?
3 components, from 3 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the 40 to WP27D-P050VA3 design files?
From the vroland/epdiy-hardware repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the 40 to WP27D-P050VA3 design in my own project?
Yes, under the terms of its CC-BY-SA-4.0 license, which vroland chose for the repository.
More boards in epdiy-hardware
ESP32Kaleido 6" controller based on epdiy v7
138.1 × 104.6 mm121 parts4LCC-BY-SA-4.073
ESP32Epdiy v7
100 × 55 mm108 parts4LCC-BY-SA-4.073
ESP32Epdiy v7
128.4 × 74.9 mm105 parts4LCC-BY-SA-4.073
40 pins PCB tester
74 × 43 mm51 parts2LCC-BY-SA-4.073
Charger stepup
31.1 × 16.1 mm19 parts2LCC-BY-SA-4.073
atopile
AxxAxx
eez-open