Epdiy v7-raw
vroland·epdiy-hardware·epdiy-v7-raw/epdiy-v7-raw.kicad_pcb
About the Epdiy v7-raw PCB
Epdiy v7-raw is an open source ESP32 PCB design by vroland, published on GitHub under the CC-BY-SA-4.0 license. It is a 4-layer board measuring 128.4 × 74.9 mm, with 105 components from 58 distinct parts.
Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the MPU-6500, C841192, C255606, C139292 and C2827693. By type, the board carries 37 capacitors, 31 resistors, 10 diodes, 8 ICs, 6 connectors and 4 switches.
From the project
Hardware design files for EPDiy: https://github.com/vroland/epdiy.
This V7 controller iteration is based on the ESP32S3 for 8 bit panels. Highlights of the new board include:
- Support for 8-bit displays ED052TC* and 6 inches 'Kindle like' 34 pin panels - No IO expander since we have enough pins. Plus MicroSD support to load images offline - MPU6500 accelerometer so it can auto-detect rotation - An optional ultra low consumption RV3032 RTC, LiPo charging
Main components on the Epdiy v7-raw
Epdiy v7-raw bill of materials (BOM)
105 components, 58 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MPU-6500 | C50278_IMU_QFN-24_L3.0-W3.0-P0.40-BL-EP | IC1 |
| 1 | C841192 RT9080-33GJ5 | TSOT-23-5 | U1 |
| 1 | C255606 74LVC1G34 | SOT-23-5 | U2 |
| 1 | C139292 TPS651851RSLR | TPS651851RSLR | U3 |
| 1 | C2827693 USBLC6-2P6 | SOT-666 | U4 |
| 1 | ESP32-S3-WROOM-1 | ESP32-S3-WROOM-1 | U8 |
| 1 | C528053 ED060XC5 | X05A20H34G | U10 |
| 1 | C16581 TP4056 | TP4056_SOP-8-PP | U11 |
| 1 | C15127 AO3401A | SOT-23 | Q1 |
| 1 | WP27D-S050VA3-R15000 | CONN-SMD_50P-P0.35_WP27D-S050VA3 | CN1 |
| 1 | C165948 USB_C_Receptacle_USB2.0 | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | EXTENSION_HEADER | PinHeader_1x05_P2.54mm_Vertical | J2 |
| 1 | SIGNALS_HEADER | PinHeader_1x07_P2.54mm_Vertical | J3 |
| 1 | S2B-PH-SM4-TB(LF)(SN) S2B-PH-SM4-TB_LF__SN_ | S2BPHSM4TBLFSN | J5 |
| 1 | THD2528-11SD-GF | MicroSD_THD252811SDGF | J6 |
| 4 | MountingHole | C2916320_SMTSO2015CTJ | H1, H2, H3, H4 |
| 1 | RTCINT_GPIO2 | SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP2 |
| 1 | TC-0522C-1.7-160G | C2845289_SW-SMD_4P-L5.2-W5.2-P3.70-LS6.4 | SW1 |
| 3 | K2-1806SQ-A2DW-04 | C5143621_KEY-SMD_TS24ZJ | SW3, SW4, SW5 |
| 1 | C76589 10k/3380K | R_0603_1608Metric | TH1 |
Show 38 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 7 | C21353 MBR0540 | D_SOD-123 | D1, D2, D3, D4, D5, D6, D7 |
| 1 | C2297 LED GREEN | LED_0805_2012Metric | D8 |
| 1 | C84256 LED RED | LED_0805_2012Metric | D9 |
| 1 | C8598 1N5817 | D_SOD-123 | D10 |
| 1 | C222947 4.7uH | L_Taiyo-Yuden_NR-50xx_HandSoldering | L1 |
| 1 | C92959 2.2uH | L_Taiyo-Yuden_NR-40xx_HandSoldering | L2 |
| 10 | C1779 4.7uF | C_0805_2012Metric | C1, C4, C5, C7, C8, C11, C24, C26 +2 |
| 6 | C15850 10uF | C_0805_2012Metric | C2, C3, C9, C12, C19, C32 |
| 2 | C45783 22uF | C_0805_2012Metric | C6, C10 |
| 1 | C28323 1uF | C_0402_1005Metric | C14 |
| 1 | C49678 22pF | C_0805_2012Metric | C15 |
| 1 | C16133 100uF | CP_EIA-3528-15_AVX-H | C17 |
| 1 | C28323 1uF | C_0805_2012Metric | C18 |
| 2 | C1710 10nF | C_0805_2012Metric | C20, C25 |
| 5 | C49678 100nF | C_0805_2012Metric | C22, C23, C29, C30, C40 |
| 2 | C49217 2.2uF | C_0805_2012Metric | C27, C33 |
| 2 | C1848 1uF/50V | C_1206_3216Metric | C34, C36 |
| 3 | C28323 1uF/25V | C_0805_2012Metric | C35, C37, C38 |
| 1 | C49678 1uF | C_0805_2012Metric | C39 |
| 1 | C25804 10k | R_0402_1005Metric | R1 |
| 2 | C23186 5.1k | R_0603_1608Metric | R2, R7 |
| 1 | C21190 5.1k | R_0603_1608Metric | R3 |
| 2 | C25804 5.1k | R_0603_1608Metric | R4, R6 |
| 1 | C21189 10k | R_0402_1005Metric | R5 |
| 1 | C21190 2.4k | R_0603_1608Metric | R8 |
| 1 | C23212 3.83k | R_0603_1608Metric | R9 |
| 6 | C25804 10k | R_0603_1608Metric | R10, R11, R14, R15, R16, R32 |
| 1 | C25804 1k | R_0603_1608Metric | R12 |
| 1 | C308324 10k | R_0603_1608Metric | R13 |
| 1 | C23172 43k | R_0603_1608Metric | R18 |
| 2 | C22935 1M | R_0603_1608Metric | R19, R23 |
| 1 | C23196 52.3k | R_0603_1608Metric | R20 |
| 1 | C25822 680k | R_0603_1608Metric | R21 |
| 1 | C22807 150k | R_0603_1608Metric | R22 |
| 1 | C25819 47.5k | R_0603_1608Metric | R24 |
| 4 | C25819 47k | R_0603_1608Metric | R26, R27, R28, R29 |
| 2 | C25803 100k | R_0603_1608Metric | R30, R31 |
| 1 | C425297 R_Pack04 | RESN_F392JTCE_UNR_SD-pullup | RN1 |
Epdiy v7-raw design files
The KiCad project lives in the vroland/epdiy-hardware repository on GitHub; these links point at the commit this page was built from.
Epdiy v7-raw: common questions
What microcontroller does the Epdiy v7-raw use?
The Epdiy v7-raw is built around the ESP32-S3-WROOM-1, from the ESP32 family.
How big is the Epdiy v7-raw PCB?
The Epdiy v7-raw measures 128.4 × 74.9 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Epdiy v7-raw?
105 components, from 58 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Epdiy v7-raw design files?
From the vroland/epdiy-hardware repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Epdiy v7-raw design in my own project?
Yes, under the terms of its CC-BY-SA-4.0 license, which vroland chose for the repository.
Can I test firmware for the Epdiy v7-raw without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in epdiy-hardware
ESP32
Kaleido 6" controller based on epdiy v7
vroland
138.1 × 104.6 mm121 parts4LCC-BY-SA-4.074ESP32
Epdiy v7
vroland
100 × 55 mm108 parts4LCC-BY-SA-4.07440 pins PCB tester
vroland
74 × 43 mm51 parts2LCC-BY-SA-4.074Charger stepup
vroland
31.1 × 16.1 mm19 parts2LCC-BY-SA-4.07440 to WP27D-P050VA3
vroland
40 × 30 mm3 parts2LCC-BY-SA-4.074
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k