ReadyButtonBoard
About the ReadyButtonBoard PCB
ReadyButtonBoard is an open source PCB design by WannaBAcoder, published on GitHub. It is a 2-layer board measuring 53.4 × 94 mm, with 6 components from 5 distinct parts.
By type, the board carries 3 connectors, 1 switch, 1 diode and 1 resistor.
It belongs with the robotics & motion, rf & radio and iot & wireless designs in this gallery.
From the project
Open Source Area Timer for combat robotics
An open-source, ESP32-based event and match timer platform featuring wireless remote integration, with web interface.
Note: The local AP interface is identical to the network interface. If no external Wi-Fi network is available at your venue, you can run the timer in this standalone mode completely offline.
4. Station Mode (Optional): To connect the timer to an existing venue Wi-Fi network, use the configuration section at the bottom of the webpage to save your local SSID and Password.
ReadyButtonBoard bill of materials (BOM)
6 components, 5 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | CONN_01X08_SOCKET Conn_01x08_Socket | PinSocket_1x08_P2.54mm_Vertical | J1, J2 |
| 1 | C2765055 WAGO | 2060-452_998-404 | J9 |
| 1 | C2888699 START | SW_PUSH-12mm | SW1 |
| 1 | C2286 Red | LED_0603_1608Metric | D1 |
| 1 | 470 | R_0603_1608Metric | R1 |
ReadyButtonBoard design files
The KiCad project lives in the WannaBAcoder/ArenaTimer repository on GitHub; these links point at the commit this page was built from.
ReadyButtonBoard: common questions
How big is the ReadyButtonBoard PCB?
The ReadyButtonBoard measures 53.4 × 94 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ReadyButtonBoard?
6 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ReadyButtonBoard design files?
From the WannaBAcoder/ArenaTimer repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the ReadyButtonBoard design in my own project?
The repository has no license, so all rights stay with WannaBAcoder. Use it as a reference, and ask the author before reusing the design.
More boards in ArenaTimer
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0k
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Cube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1k
RPi RM0 WiFi/Bluetooth Module
schlae
11.1 × 14 mm76 parts6LNo license1.0k
Trollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979
Powerstep
95.2 × 71.5 mm28 parts4LGPL-3.0979