Throttle

WannSea·throttle·gashebel/gashebelboard.kicad_pcb

Throttle PCB layout, top view — open source RP2040/RP2350 board by WannSea

About the Throttle PCB

Throttle is an open source RP2040/RP2350 PCB design by WannSea, published on GitHub. It is a 4-layer board measuring 45.5 × 58 mm, with 15 components from 13 distinct parts.

Its main chip is the Seeed Studio XIAO SAMD21, from the RP2040/RP2350 family. Other key parts include the TJA1043T and LM78M05_TO252. By type, the board carries 4 connectors, 4 capacitors, 3 ICs, 2 resistors, 1 jumper and 1 diode.

From the project

Gashebel Firmware

Dieses Projekt nutzt das https://github.com/rp-rs/rp2040-project-template als Template.

Rust über https://rustup.rs/ installieren und anschließend ausführen:

1. Den RP2040 mit gedrückter BOOTSEL-Taste per USB verbinden und die Firmware direkt bauen und flashen:

2. Eine UF2-Datei bauen, die später manuell auf das RP2040-USB-Laufwerk kopiert werden kann:

Green LED Blinking: Sending CAN throttle command Red LED: Lever Locked

Main components on the Throttle

Throttle bill of materials (BOM)

15 components, 13 distinct parts.

QtyPartRefs
1
Seeed Studio XIAO SAMD21
U2
1
TJA1043T
U3
1
LM78M05_TO252
U4
1
Hall
J1
1
BOOT BUS
J2
1
ENCODER
J3
1
Conn_01x03_Pin
J4
1
CAN T
JP3
1
SM712_SOT23
D1
2
10µ
C1, C2
2
4.7nF
C3, C4
1
120
R1
1
1.2K
R2

Throttle design files

The KiCad project lives in the WannSea/throttle repository on GitHub; these links point at the commit this page was built from.

Throttle: common questions

What microcontroller does the Throttle use?

The Throttle is built around the Seeed Studio XIAO SAMD21, from the RP2040/RP2350 family.

How big is the Throttle PCB?

The Throttle measures 45.5 × 58 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Throttle?

15 components, from 13 distinct parts. The full bill of materials is listed on this page.

Where can I download the Throttle design files?

From the WannSea/throttle repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Throttle design in my own project?

The repository has no license, so all rights stay with WannSea. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Throttle without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards