27 open source boards using the LM78M05_TO252

Real designs built with the LM78M05_TO252, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

27 boardsClear filters|Most starred

How designs wire the LM78M05_TO252

Read from the KiCad layouts of 20 open source designs, one per repository: what each pin of the LM78M05_TO252 connects to, and the resistors, capacitors and other passives placed on it.

  • The VI pin has a decoupling capacitor on 17 of 20 designs, most often 1 µF (then 330 nF).
  • The VO pin has a decoupling capacitor on 17 of 20 designs, most often 100 nF (then 1 µF).
VIpin 1Connected to: 12V 65% · a signal 35%
  • Decoupling capacitor on 85% · 1 µF (8), 330 nF (6), 10 µF (5)
GNDpin 2Connected to: GND 100%
VOpin 3Connected to: 5V 75% · a signal 25%
  • Decoupling capacitor on 85% · 100 nF (9), 1 µF (6), 22 µF (4)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include RFBitBangSMT by profdc9, Board carrier by mck1117, GDI-4ch by rusefi and FastLOGIC by Neumi.

The LM78M05_TO252 in open source designs

The gallery holds 27 open source boards using the LM78M05_TO252 from 22 GitHub repositories; a typical one measures about 80.9 × 69.7 mm and carries around 58 components.

62% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.

The most starred is RFBitBangSMT by profdc9.

Microcontrollers on boards using the LM78M05_TO252

LM78M05_TO252: common questions

Where can I find a LM78M05_TO252 reference design?

Each of the 27 boards on this page is a real design using the LM78M05_TO252. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the LM78M05_TO252 VI pin?

The VI pin has a decoupling capacitor on 17 of 20 designs, most often 1 µF (then 330 nF). Counted from the KiCad layouts of 20 open source designs using the LM78M05_TO252.

What decoupling capacitors do designs use on the LM78M05_TO252 VO pin?

The VO pin has a decoupling capacitor on 17 of 20 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 20 open source designs using the LM78M05_TO252.

What parts are used alongside the LM78M05_TO252?

The TJA1051T-3, f042_wideband_module, AMS1117-3.3, ATMEGA328P-AU and LM386 appear in the most repositories here.

Which microcontrollers do boards using the LM78M05_TO252 use?

Most are built on STM32 (8), AVR/Arduino (7), RP2040/RP2350 (3) and PIC (2).

How big is a typical board using the LM78M05_TO252?

The median is 80.9 × 69.7 mm, and 62% are two-layer designs.

What is the most popular open source board using the LM78M05_TO252?

By GitHub stars, RFBitBangSMT by profdc9, with 221 stars.

Can I simulate one of these boards using the LM78M05_TO252 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part