Automedon

waterloo-rocketry·fydp2026·Automedon/automedon/automedon.kicad_pcb

This repository ships a schematic but no board layout.

About the Automedon PCB

Automedon is an open source STM32 PCB design by waterloo-rocketry, published on GitHub. It is a 2-layer board, with 112 components from 46 distinct parts.

Its main chip is the STM32H750ZBTX, from the STM32 family. Other key parts include the TPS26631PWP, TPS7A4701XRGW, INA290A3, INA849DGK and REF6050XDGK. By type, the board carries 60 connectors, 35 ICs, 4 resistors, 3 switches and 1 fuse.

From the project

Master Repo for all FYDP 2026 related code and files

Sisyphus is a regeneratively cooled, 3D-printed liquid rocket engine. There are threee main electrical projects that support this system: Automedon, Achilles, and Theseus

Main components on the Automedon

TPS26631PWPTPS7A4701XRGWINA290A3INA849DGKREF6050XDGKUA7805TPS76933MCP2562STM32H750ZBTXTPS565201INA180A3USB POWERDAQ PWRUSB PWRCB37LM34CAZDAQ CAN

Automedon bill of materials (BOM)

112 components, 46 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
TPS26631PWP
~
U1
1
TPS7A4701XRGW
~
U2
1
INA290A3
~
U3
6
INA849DGK
~
U4, U5, U6, U7, U8, U9
1
INA849DGK
DS108G-M2
U10
1
INA849DGK
ER605v2
U11
1
REF6050XDGK
~
U12
1
UA7805
~
U13
1
TPS76933
~
U14
1
MCP2562
~
U15
1
STM32H750ZBTX
~
U16
1
TPS565201
~
U17
1
INA180A3
OC200
U18
1
USB POWER
U19
3
DAQ PWR
U20, U21, U22
6
~
U23, U24, U25, U26, U28, U35
1
USB PWR
U27
3
CB37
U29, U30, U31
1
LM34CAZ
U32
2
DAQ CAN
U33, U34
Show 26 more
QtyPartRefs
1
SCREW_TERMINAL_01X02
701W-X2/03
J1
1
SCREW_TERMINAL_01X03
~
J2
2
SCREW_TERMINAL_01X08
PWM-02RMFS-TS7001
J3, J4
2
SCREW_TERMINAL_01X08
T4131012081-000
J5, J6
2
SCREW_TERMINAL_01X02
MS3102E14S-6S
J7, J11
8
MS3102E14S-6S
J8, J9, J10, J12, J50, J51, J52, J53
22
3211771
J13, J16, J29, J30, J31, J32, J33, J34 +14
2
Conn_01x02_Pin
J14, J15
15
09-4224-00-04
J17, J18, J19, J20, J21, J22, J23, J24 +7
1
PWM-02RMFS-TS7001
J45
2
Eth Ext 4 pin
J57, J58
2
32xxx
J59, J60
1
B1NQ1C4
CB1
1
UK 6-FSI/C (3118203)
F1
1
Adafruit 575 Voltmeter
MES1
1
XDR-480E-12
PS1
1
~
PS2
1
RRS20F1ABLKREDBLK31P
SW1
1
SW_DPST_x2
SW2
1
KEYSWITCH_SPST
SW3
4
K1
TC1, TC2, TC5, TC6
1
SPUC12360
UPS1
1
510R
100k
R1
1
1.3KR
100k
R2
1
150R
100k
R3
1
500R
100k
R4

Automedon design files

The KiCad project lives in the waterloo-rocketry/fydp2026 repository on GitHub; these links point at the commit this page was built from.

Automedon: common questions

What microcontroller does the Automedon use?

The Automedon is built around the STM32H750ZBTX, from the STM32 family.

How big is the Automedon PCB?

The Automedon has 2 copper layers and is 1.6 mm thick.

How many components are on the Automedon?

112 components, from 46 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Automedon design files?

From the waterloo-rocketry/fydp2026 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Automedon design in my own project?

The repository has no license, so all rights stay with waterloo-rocketry. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Automedon without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in fydp2026

Similar boards