TinyUPS
way5·tinyUPS·schematics/CAM/tinyUPS.kicad_pcb
About the TinyUPS PCB
TinyUPS is an open source PCB design by way5, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 49 × 64 mm, with 43 components from 29 distinct parts.
Other key parts include the MP1484 (SOIC8E). By type, the board carries 15 resistors, 11 connectors, 6 transistors, 5 capacitors, 2 diodes and 1 IC.
It belongs with the power & battery designs in this gallery.
From the project
tinyUPS is the Control and Management Tool with SNMP Server for your UPS
tinyUPS is the way to extend functionality of an Uninterruptible Power Supply (UPS)/power inverters. It provides onboard SNMP server, temperature control and a Control Panel (CP), just like on an enterprise systems. The project is now on beta test stage, however it shows very stable results during months 24/7. If you'll decide to modify your own UPS it's at your own risk.

Main components on the TinyUPS
TinyUPS bill of materials (BOM)
43 components, 29 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MP1484 (SOIC8E) | SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 5 | BSS138 | SOT-23_Handsoldering | Q1, Q2, Q3, Q4, Q5 |
| 1 | IRLML2502 | SOT-23W_Handsoldering | Q7 |
| 1 | P1-16 | PinHeader_2x08_P2.54mm_Vertical | J1 |
| 1 | P15-40 | PinHeader_2x08_P2.54mm_Vertical | J2 |
| 1 | CS/SS | PinHeader_1x01_P2.54mm_Vertical | J5 |
| 1 | MOSI | PinHeader_1x01_P2.54mm_Vertical | J6 |
| 1 | CLK | PinHeader_1x01_P2.54mm_Vertical | J7 |
| 1 | INF | PinHeader_1x01_P2.54mm_Vertical | J8 |
| 1 | OUTF | PinHeader_1x01_P2.54mm_Vertical | J9 |
| 1 | +5V | PinHeader_1x01_P2.54mm_Vertical | J10 |
| 1 | FAN | PinHeader_1x02_P2.54mm_Vertical | J11 |
| 1 | +12V | PinHeader_1x01_P2.54mm_Vertical | J13 |
| 1 | GND | PinHeader_1x01_P2.54mm_Vertical | J14 |
| 1 | 220k | Potentiometer_Bourns_3224W_Vertical | RV1 |
| 1 | 1k | PinHeader_1x02_P2.54mm_Vertical | TH1 |
| 1 | 1N914 | D_1210_3225Metric_Pad1.42x2.65mm_HandSolder | D1 |
| 1 | LED | LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D3 |
| 1 | 100uH | L_Bourns-SRN8040_8x8.15mm | L1 |
| 1 | 100nF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1 |
Show 9 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 4.7nF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C2 |
| 2 | 10uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C3, C5 |
| 1 | 10nF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C4 |
| 1 | 100k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1 |
| 10 | 10k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2, R3, R4, R5, R6, R7, R8, R9 +2 |
| 1 | 2k2 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R12 |
| 1 | 1k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R13 |
| 1 | 1k5 | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R14 |
| 1 | 8k2 | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R15 |
TinyUPS design files
The KiCad project lives in the way5/tinyUPS repository on GitHub; these links point at the commit this page was built from.
TinyUPS: common questions
How big is the TinyUPS PCB?
The TinyUPS measures 49 × 64 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the TinyUPS?
43 components, from 29 distinct parts. The full bill of materials is listed on this page.
Where can I download the TinyUPS design files?
From the way5/tinyUPS repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the TinyUPS design in my own project?
Yes, under the terms of its GPL-3.0 license, which way5 chose for the repository.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k