HardLabs

DSPIC30F4013-TUTORIAL

WelsTheory·DSPIC30F4013-TUTORIAL·PCB - DSPIC30F/dsPIC_PCB.kicad_pcb

DSPIC30F4013-TUTORIAL PCB layout, top view — open source PIC board by WelsTheory

About the DSPIC30F4013-TUTORIAL PCB

DSPIC30F4013-TUTORIAL is an open source PIC PCB design by WelsTheory, published on GitHub. It is a 2-layer board measuring 77.2 × 78.7 mm, with 16 components from 13 distinct parts.

Its main chip is the DSPIC30F4013-30I_P, from the PIC family. Other key parts include the L7805. By type, the board carries 2 ICs, 2 diodes and 1 connector.

Main components on the DSPIC30F4013-TUTORIAL

DSPIC30F4013-30I_PL7805

DSPIC30F4013-TUTORIAL bill of materials (BOM)

16 components, 13 distinct parts.

QtyPartRefs
1
DSPIC30F4013-30I_P
U1
1
L7805
U2
1
Barrel_Jack_Switch
J10
1
Conn_01x16_Female
1
1
10K
10K
1
12MHz
12MHz
1
15pF
15pF
1
20K
20K
1
100nF
100nF
1
330
330
3
Conn_01x02_Male
INT0, INT1, RB1
1
Conn_01x03_Male
RB0
2
LED
D1, D2

DSPIC30F4013-TUTORIAL design files

The KiCad project lives in the WelsTheory/DSPIC30F4013-TUTORIAL repository on GitHub; these links point at the commit this page was built from.

DSPIC30F4013-TUTORIAL: common questions

What microcontroller does the DSPIC30F4013-TUTORIAL use?

The DSPIC30F4013-TUTORIAL is built around the DSPIC30F4013-30I_P, from the PIC family.

How big is the DSPIC30F4013-TUTORIAL PCB?

The DSPIC30F4013-TUTORIAL measures 77.2 × 78.7 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the DSPIC30F4013-TUTORIAL?

16 components, from 13 distinct parts. The full bill of materials is listed on this page.

Where can I download the DSPIC30F4013-TUTORIAL design files?

From the WelsTheory/DSPIC30F4013-TUTORIAL repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the DSPIC30F4013-TUTORIAL design in my own project?

The repository has no license, so all rights stay with WelsTheory. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the DSPIC30F4013-TUTORIAL without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug PIC firmware against it before you order a PCB.

Similar boards