Motor Driver, First
wesfletch·rookie·hw/robot_controller/motordriver.kicad_pcb
About the Motor Driver, First PCB
Motor Driver, First is an open source PCB design by wesfletch, published on GitHub. It is a 4-layer board measuring 50 × 28 mm, with 24 components from 12 distinct parts.
Other key parts include the DRV8800PWP. By type, the board carries 7 resistors, 6 capacitors, 3 LEDs and 2 ICs.
It belongs with the robotics & motion designs in this gallery.
From the project
A small diff-drive robot, from scratch.
Main components on the Motor Driver, First
Motor Driver, First bill of materials (BOM)
24 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | DRV8800PWP | HTSSOP-16-1EP_4.4x5mm_P0.65mm_EP3.4x5mm_Mask3x3mm_ThermalVias | U1, U2 |
| 1 | Conn_01x07 | JST_XH_B7B-XH-AM_1x07_P2.50mm_Vertical | CTRL1 |
| 1 | 100uF | WCAP-ASLI_6.3X5.5_DXL_ | C_BULK1 |
| 2 | 0.1uF | CC0603N_YAG | C_CP1, C_CP2 |
| 1 | Screw_Terminal_01x04 | TerminalBlock_Phoenix_MPT-0,5-4-2.54_1x04_P2.54mm_Horizontal | OUT1 |
| 1 | Conn_01x02 | AMASS_XT30UPB-F_1x02_P5.0mm_Vertical | POW1 |
| 3 | LED | LED_SMLD12_ROM | V_IN1, V_M1, V_M2 |
| 4 | 0.1uF | C_0603_1608Metric | C4, C8, C13, C14 |
| 2 | 0.22uF | C_0603_1608Metric | C5, C10 |
| 2 | 10k | R_0603_1608Metric | R1, R3 |
| 2 | 0.2 | R_0603_1608Metric | R2, R4 |
| 3 | 500 | R_0603_1608Metric | R5, R6, R7 |
Motor Driver, First design files
The KiCad project lives in the wesfletch/rookie repository on GitHub; these links point at the commit this page was built from.
Motor Driver, First: common questions
How big is the Motor Driver, First PCB?
The Motor Driver, First measures 50 × 28 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Motor Driver, First?
24 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the Motor Driver, First design files?
From the wesfletch/rookie repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Motor Driver, First design in my own project?
The repository has no license, so all rights stay with wesfletch. Use it as a reference, and ask the author before reusing the design.
More boards in rookie
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kTrollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979Powerstep
rene-dev
95.2 × 71.5 mm28 parts4LGPL-3.097911ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979Diff driver
rene-dev
32 × 22 mm14 parts2LGPL-3.0979