Carrier
WesleyVong·oscope·hw/carrier/carrier/carrier.kicad_pcb
About the Carrier PCB
Carrier is an open source PCB design by WesleyVong, published on GitHub. It is a 4-layer board measuring 100 × 90 mm, with 51 components from 26 distinct parts.
Other key parts include the FT232H, TPS565208, 93LCxxB and TPD12S521DBT. By type, the board carries 20 resistors, 15 capacitors, 7 connectors, 4 ICs, 3 inductors and 1 crystal.
From the project
Oscope project for ECE395
Main components on the Carrier
Carrier bill of materials (BOM)
51 components, 26 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | FT232H | LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | TPS565208 | SOT-23-6 | U2 |
| 1 | 93LCxxB | MSOP-8_3x3mm_P0.65mm | U3 |
| 1 | TPD12S521DBT | TSSOP-38_4.4x9.7mm_P0.5mm | U4 |
| 1 | Crystal_GND24_Small | Crystal_SMD_Abracon_ABM10-4Pin_2.5x2.0mm | Y1 |
| 2 | BTE-040-01-L-D-A | SAMTEC_BTE-040-01-X-D-A | J1, J2 |
| 1 | Barrel_Jack | BarrelJack_CUI_PJ-063AH_Horizontal | J3 |
| 1 | USB_C_Receptacle_USB2.0_14P | USB_C_Receptacle_GCT_USB4110 | J4 |
| 2 | QSE-020-01-X-D-A | SAMTEC_QSE-020-01-X-D-A | J5, J7 |
| 1 | HDMI_A | HDMI_A_Amphenol_10029449-x01xLF_Horizontal | J6 |
| 1 | BAT54W | SOT-323_SC-70 | D1 |
| 2 | FB | L_0402_1005Metric | FB2, FB3 |
| 1 | 3.3uH | L_Wuerth_MAPI-4030 | L1 |
| 1 | 10uF | C_1206_3216Metric | C1 |
| 7 | 0.1uF | C_0402_1005Metric | C2, C6, C7, C12, C13, C14, C15 |
| 2 | 22uF | C_0603_1608Metric | C3, C4 |
| 3 | 10uF | C_0402_1005Metric | C5, C8, C9 |
| 2 | 8pF | C_0402_1005Metric | C10, C11 |
| 1 | 54.9k | R_0402_1005Metric | R1 |
| 8 | 10k | R_0402_1005Metric | R2, R3, R7, R9, R10, R15, R16, R20 |
Show 6 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 5.1k | R_0402_1005Metric | R4, R5 |
| 1 | 12k | R_0402_1005Metric | R6 |
| 1 | 2.2k | R_0402_1005Metric | R8 |
| 4 | 47k | R_0402_1005Metric | R11, R12, R13, R14 |
| 2 | 4.7k | R_0402_1005Metric | R17, R18 |
| 1 | 27k | R_0402_1005Metric | R19 |
Carrier design files
The KiCad project lives in the WesleyVong/oscope repository on GitHub; these links point at the commit this page was built from.
Carrier: common questions
How big is the Carrier PCB?
The Carrier measures 100 × 90 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Carrier?
51 components, from 26 distinct parts. The full bill of materials is listed on this page.
Where can I download the Carrier design files?
From the WesleyVong/oscope repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Carrier design in my own project?
The repository has no license, so all rights stay with WesleyVong. Use it as a reference, and ask the author before reusing the design.