9 open source boards using the TPS565208
Real designs built with the TPS565208, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
2nd mainboard
Fiberprinter
99 × 99 mm110 parts2LNo license4STM32
UltraHawk
InSynchronous
50 × 87 mm76 parts2LMIT2Meshtastic node
benkyd
150 × 50 mm110 parts4LNo license1Main 4.3 old
hughminhphan
133.1 × 97.6 mm144 parts4LNo license0Microchip SAM
Motherboard
MuddJTS
141.5 × 53.8 mm134 parts4LNo license0ESP32
Bedroom-Engineering-Propulsive-Landing-Project
nimishcoder1232
45 × 81 mm70 parts4LNo license0StealthBurner CAN Fan
CharlieYu4994
51.6 × 35.1 mm23 parts2LNo license10RP2040/RP2350
PID Toaster
benkyd
119.8 × 126 mm105 parts2LNo license1Carrier
WesleyVong
100 × 90 mm51 parts4LNo license0
How designs wire the TPS565208
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the TPS565208 connects to, and the resistors, capacitors and other passives placed on it.
- The SW pin has a inductor on 8 of 8 designs, most often 2.2 µH (then 3.3 µH).
- The SW pin has a series capacitor on 8 of 8 designs, most often 100 nF (then 22 µF).
- The VBST pin has a series capacitor on 8 of 8 designs, most often 100 nF (then 22 µF).
- The VIN pin has a decoupling capacitor on 7 of 8 designs, most often 10 µF (then 100 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1 | Connected to: GND 88% | — |
| SWpin 2 | Connected to: Signal 100% |
|
| VINpin 3 | Connected to: 12V 50% · a signal 50% |
|
| VFBpin 4 | Connected to: Signal 100% |
|
| ENpin 5 | Connected to: Signal 63% · 12V 38% |
|
| VBSTpin 6 | Connected to: Signal 100% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include StealthBurner CAN Fan by CharlieYu4994, 2nd mainboard pcb by Fiberprinter, UltraHawk by InSynchronous and Meshtastic node by benkyd.
The TPS565208 in open source designs
The gallery holds 9 open source boards using the TPS565208 from 8 GitHub repositories; a typical one measures about 100 × 87 mm and carries around 105 components.
56% use four copper layers or more, and 11% carry an open source license.
The most starred is StealthBurner CAN Fan by CharlieYu4994.
Parts used alongside the TPS565208
Microcontrollers on boards using the TPS565208
What boards using the TPS565208 are built for
TPS565208: common questions
Where can I find a TPS565208 reference design?
Each of the 9 boards on this page is a real design using the TPS565208. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the TPS565208 SW pin connected?
The SW pin has a inductor on 8 of 8 designs, most often 2.2 µH (then 3.3 µH). Counted from the KiCad layouts of 8 open source designs using the TPS565208.
How is the TPS565208 VBST pin connected?
The VBST pin has a series capacitor on 8 of 8 designs, most often 100 nF (then 22 µF). Counted from the KiCad layouts of 8 open source designs using the TPS565208.
What decoupling capacitors do designs use on the TPS565208 VIN pin?
The VIN pin has a decoupling capacitor on 7 of 8 designs, most often 10 µF (then 100 nF). Counted from the KiCad layouts of 8 open source designs using the TPS565208.
Which microcontrollers do boards using the TPS565208 use?
Most are built on AVR/Arduino (1), ESP32 (1), RP2040/RP2350 (1) and Microchip SAM (1).
How big is a typical board using the TPS565208?
The median is 100 × 87 mm, and 44% are two-layer designs.
What is the most popular open source board using the TPS565208?
By GitHub stars, StealthBurner CAN Fan by CharlieYu4994, with 10 stars.
Can I simulate one of these boards using the TPS565208 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.