55 open source boards using the FT232H

Real designs built with the FT232H, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

55 boardsClear filters|Most starred

How designs wire the FT232H

Read from the KiCad layouts of 18 open source designs, one per repository: what each pin of the FT232H connects to, and the resistors, capacitors and other passives placed on it.

  • The REF pin has a resistor to GND on 13 of 18 designs, most often 12 kΩ.
  • The VCCA pin has a capacitor to GND on 13 of 13 designs, most often 100 nF (then 2.2 µF).
  • The VCCIO pins have a decoupling capacitor on 12 of 13 designs, most often 100 nF (then 2.2 µF).
  • The VCCCORE pin has a capacitor to GND on 12 of 13 designs, most often 100 nF (then 1 µF).
XCSIpin 1Connected to: AZ1117CH-1.8TRG1 28%, NCP1117LPST33T3G 22%, a connector 22%
  • Crystal on 61% · 12 MHz (7)
  • Capacitor to GND on 39% · 10 pF (2), 18 pF (1), 20 pF (1)
XCSOpin 2Connected to: AZ1117CH-1.8TRG1 28%, M.2-CONNECTOR-E 22%, a connector 22% · not connected 28%
  • Crystal on 39% · 12 MHz (4)
  • Capacitor to GND on 33% · 18 pF (1), 20 pF (1), 10 pF (1)
VPHYpin 3Connected to: Signal 56% · GND 22% · 3.3V 22%
  • Capacitor to GND on 61% · 100 nF (9), 4.7 µF (5), 10 µF (4)
AGNDpin 4, 9, 41Connected to: GND 91%
REFpin 5Connected to: Signal 78% · 3.3V 22%
  • Resistor to GND on 72% · 12 kΩ (12)
VPLLpin 8Connected to: Signal 64% · 3.3V 36%
  • Capacitor to GND on 79% · 100 nF (9), 4.7 µF (5), 10 µF (4)
  • Ferrite bead on 36%
GNDpin 10, 11, 22, 23, 35, 36, 47, 48Connected to: GND 100%
VCCIOpin 12, 24, 46Connected to: 3.3V 100%
  • Decoupling capacitor on 92% · 100 nF (44), 2.2 µF (7), 4.7 µF (2)
  • Ferrite bead on 38%
ADBUS0pin 13Connected to: A connector 46%, the microcontroller 23%
  • Series resistor on 38% · 22 Ω (1), 33 Ω (1), 10 kΩ (1)
ADBUS1pin 14Connected to: A connector 46%, the microcontroller 23%
  • Series resistor on 46% · 10 kΩ (2), 22 Ω (1), 33 Ω (1)
ADBUS2pin 15Connected to: A connector 46%, the microcontroller 23%
  • Series resistor on 38% · 22 Ω (1), 33 Ω (1), 10 kΩ (1)
ADBUS3pin 16Connected to: A connector 38%
  • Series resistor on 31% · 22 Ω (1), 33 Ω (1), 1.3 kΩ (1)
ADBUS4pin 17Connected to: A connector 31% · not connected 38%
  • Series resistor on 31% · 33 Ω (1), 1.3 kΩ (1), 0 Ω (1)
ACBUS7pin 31Connected to: Not connected 62% · a signal 38%
ACBUS9pin 33Connected to: Not connected 62% · a signal 38%
RESETpin 34Connected to: Signal 85% · 3.3V 15%
  • Pull-up to 3.3V on 85% · 10 kΩ (9), 12 kΩ (1), 1 kΩ (1)
  • Capacitor to GND on 69% · 100 nF (4), 10 nF (3), 1 µF (1)
VCCApin 37Connected to: Signal 77% · VCCA 23%
  • Capacitor to GND on 100% · 100 nF (11), 2.2 µF (1)
VCCCOREpin 38Connected to: Signal 69% · 1.8V 23%
  • Capacitor to GND on 92% · 100 nF (10), 1 µF (1), 2.2 µF (1)
VCCDpin 39Connected to: 3.3V 77% · not connected 23%
  • Decoupling capacitor on 62% · 100 nF (13), 4.7 µF (2), 2.2 µF (2)
VREGINpin 40Connected to: 5V 92%
  • Decoupling capacitor on 77% · 100 nF (12), 4.7 µF (5), 2.2 µF (3)
TESTpin 42Connected to: GND 92%
EEDATApin 43Connected to: 93LC56BT-I/OT 23% · not connected 23%
  • Series resistor on 77% · 2.2 kΩ (6), 2 kΩ (3)
EECLKpin 44Connected to: 93LC56BT-I/OT 23% · not connected 23%
  • Pull-up to 3.3V on 62% · 10 kΩ (6), 12 kΩ (1)
EECSpin 45Connected to: 93LC56BT-I/OT 23% · not connected 23%
  • Pull-up to 3.3V on 62% · 10 kΩ (6), 12 kΩ (1)

13 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include 5V Development Board by efabless, HUB75E ICE40 by riktw, CPArti-FPGA-Development-Board by AAWO and Board gw1 24 by andrastantos.

The FT232H in open source designs

The gallery holds 55 open source boards using the FT232H from 18 GitHub repositories; a typical one measures about 76.2 × 73.8 mm and carries around 84 components.

67% are two-layer designs, the rest use four layers or more, and 16% carry an open source license.

The most starred is Caravel-Nucleo v2-M.2 by efabless.

Microcontrollers on boards using the FT232H

FT232H: common questions

Where can I find a FT232H reference design?

Each of the 55 boards on this page is a real design using the FT232H. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the FT232H REF pin?

The REF pin has a resistor to GND on 13 of 18 designs, most often 12 kΩ. Counted from the KiCad layouts of 18 open source designs using the FT232H.

How is the FT232H VCCA pin connected?

The VCCA pin has a capacitor to GND on 13 of 13 designs, most often 100 nF (then 2.2 µF). Counted from the KiCad layouts of 18 open source designs using the FT232H.

What decoupling capacitors do designs use on the FT232H VCCIO pin?

The VCCIO pins have a decoupling capacitor on 12 of 13 designs, most often 100 nF (then 2.2 µF). Counted from the KiCad layouts of 18 open source designs using the FT232H.

What parts are used alongside the FT232H?

The W25Q32FVSS, W25Q32JVSSIQ, 93C56, AZ1117CH-1.8TRG1 and Caravel appear in the most repositories here.

Which microcontrollers do boards using the FT232H use?

Most are built on FPGA (13).

How big is a typical board using the FT232H?

The median is 76.2 × 73.8 mm, and 67% are two-layer designs.

What is the most popular open source board using the FT232H?

By GitHub stars, Caravel-Nucleo v2-M.2 by efabless, with 40 stars.

Can I simulate one of these boards using the FT232H before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part