RiksLift
wilbert-alberts·RiksLift·Arduino/motorcontroller/MotorControllerWithTempSensor.kicad_sch
About the RiksLift PCB
RiksLift is an open source PCB design by wilbert-alberts, published on GitHub. It is a board, with 42 components from 23 distinct parts.
Other key parts include the ILQ74 and LM324. By type, the board carries 21 resistors, 8 connectors, 6 ICs, 3 capacitors, 2 switches and 1 jumper.
It belongs with the robotics & motion designs in this gallery.
From the project
This repository provides three projects: - MainSystem: a main controller intended to be deployed on a Raspberry Pi - LiftSystem: a temporary version of the LiftSystem that can be build on a Raspberry PI but should not be deployed there. - LiftSystem.esp: a controller that transla
This repository provides three projects: - MainSystem: a main controller intended to be deployed on a Raspberry Pi - LiftSystem: a temporary version of the LiftSystem that can be build on a Raspberry PI but should not be deployed there. - LiftSystem.esp: a controller that translates movement commands of the MainSystem into corresponding actions for the LiftMotor.
Main components on the RiksLift
RiksLift bill of materials (BOM)
42 components, 23 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | ILQ74 | U1, U2, U4 | |
| 2 | Conn_01x10_Female | U1L1, U1R1 | |
| 1 | LM324 | U3 | |
| 1 | From ESU | J1 | |
| 1 | From ESD | J2 | |
| 2 | Screw_Terminal_01x02 | J4, J5 | |
| 1 | Screw_Terminal_01x03 | J6 | |
| 1 | Screw_Terminal_01x04 | J7 | |
| 1 | From VFD | J8 | |
| 1 | To VFD | J9 | |
| 1 | Connect GNDs | JP1 | |
| 1 | End stop Up | SW1 | |
| 1 | End Stop Down | SW2 | |
| 1 | LED | D1 | |
| 1 | 1000u 16V | C1 | |
| 2 | 10u 16V | C2, C3 | |
| 2 | 2k7 | R2, R4 | |
| 3 | 1k2 | R3, R5, R6 | |
| 3 | 3k3 | R7, R8, R9 | |
| 2 | 4k7 | R10, R17 |
Show 3 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | 270 | R11, R12, R13, R14 | |
| 6 | 10k | R15, R16, R18, R19, R20, R21 | |
| 1 | 2k2 | R22 |
RiksLift design files
The KiCad project lives in the wilbert-alberts/RiksLift repository on GitHub; these links point at the commit this page was built from.
RiksLift: common questions
How many components are on the RiksLift?
42 components, from 23 distinct parts. The full bill of materials is listed on this page.
Where can I download the RiksLift design files?
From the wilbert-alberts/RiksLift repository on GitHub, which has the schematic; the links under Design files point to each one.
Can I use the RiksLift design in my own project?
The repository has no license, so all rights stay with wilbert-alberts. Use it as a reference, and ask the author before reusing the design.
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kTrollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979Powerstep
rene-dev
95.2 × 71.5 mm28 parts4LGPL-3.097911ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979Diff driver
rene-dev
32 × 22 mm14 parts2LGPL-3.0979