Wild Spy Open Source Timer
Wild-Spy·OSTBoardHardware
About the Wild Spy Open Source Timer PCB
Wild Spy Open Source Timer is an open source Microchip SAM PCB design by Wild-Spy, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 30 × 32.8 mm, with 43 components from 24 distinct parts.
Its main chip is the 1611-ATSAMD21E18A-MUT, from the Microchip SAM family. Other key parts include the DS3232SN, 296-35483-1 and UM6K33NTN. By type, the board carries 12 resistors, 7 transistors, 7 capacitors, 5 ICs, 2 switches and 1 jumper.
From the project
Hardware design for the Open Source Timer board.
This repository contains the design for the Open Source Timer board.
Rev 1.1 contains - Schematic - PCB - Gerbers - BOM - PnP File - Renders - Libs - 3D Models

Main components on the Wild Spy Open Source Timer
Wild Spy Open Source Timer bill of materials (BOM)
43 components, 24 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | DS3232SN | SOIC-20_7.5x12.8mm_Pitch1.27mm | U1 |
| 1 | 296-35483-1 TPS70933DBVR | SOT-23-5_HandSoldering | U2 |
| 2 | UM6K33NTN UM6K33N | SC88(SOT363) | U3, U4 |
| 1 | 1611-ATSAMD21E18A-MUT ATSAMD21E16B | QFN-32-1EP_5x5mm_Pitch0.5mm | U5 |
| 6 | 785-1010-2 AO3415 | SOT-23-HandSoldering | Q1, Q2, Q3, Q4, Q5, Q6 |
| 1 | 1727-4319-1 BSH103 | SOT-23-HandSoldering | Q7 |
| 1 | CONN_01X02 | Pin_Header_Straight_1x02 | Battery1 |
| 4 | CONN_01X03 | Pin_Header_Straight_1x03 | CH1, CH2, CH3, CH4 |
| 1 | JUMPER3 | SOLDER-JUMPER_2-WAY | JP1 |
| 1 | CONN_01X04 | Pin_Header_Straight_1x04_Pitch2.54mm | PBus1 |
| 1 | CKN10291 SW_PUSH | KMT071NGJLHS_3x2.6mm_switch | SW1 |
| 1 | 374-1087 ORD213 Standex-Meder Electronics | ORD213S-1 | SW2 |
| 1 | CONN_01X05 | SWD_PROG_HEADER_L | SWD1 |
| 1 | 609-4613-1 micro_USB | micro_USB | USB1 |
| 1 | 475-2512-1 LED | LED_0603 | D1 |
| 4 | 1276-1011-1 0.1uF | C_0603_HandSoldering | C1, C2, C3, C4 |
| 1 | 1276-1860-1 CL10A105KB8NNNC | C_0805 | C5 |
| 1 | 1276-1182-1 1uF | C_0603_HandSoldering | C6 |
| 1 | 1276-2017-1 CL10B225KQ8NFNC | C_0603 | C8 |
| 3 | 311-10KGR 10k | R_0603_HandSoldering | R1, R2, R8 |
Show 4 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 311-150KGR 150k | R_0603_HandSoldering | R3 |
| 5 | 311-100KGR 100k | R_0603_HandSoldering | R4, R5, R6, R7, R12 |
| 2 | 311-1.0KGR 1k | R_0603_HandSoldering | R9, R11 |
| 1 | 311-2.0KGR 2k | R_0603_HandSoldering | R10 |
Wild Spy Open Source Timer design files
The KiCad project lives in the Wild-Spy/OSTBoardHardware repository on GitHub; these links point at the commit this page was built from.
Wild Spy Open Source Timer: common questions
What microcontroller does the Wild Spy Open Source Timer use?
The Wild Spy Open Source Timer is built around the 1611-ATSAMD21E18A-MUT, from the Microchip SAM family.
How big is the Wild Spy Open Source Timer PCB?
The Wild Spy Open Source Timer measures 30 × 32.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Wild Spy Open Source Timer?
43 components, from 24 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Wild Spy Open Source Timer design files?
From the Wild-Spy/OSTBoardHardware repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Wild Spy Open Source Timer design in my own project?
Yes, under the terms of its Apache-2.0 license, which Wild-Spy chose for the repository.
Can I test firmware for the Wild Spy Open Source Timer without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Microchip SAM firmware against it before you order a PCB.
More boards in OSTBoardHardware
Similar boards
Microchip SAM
Microcontroller Expansion Card
FrameworkComputer
26 × 30 mm24 parts2LCC-BY-4.01.1kMicrochip SAM
Taco Raven
VoronDesign
120 × 113 mm349 parts4LGPL-3.01.1kMicrochip SAM
Fpgaboy
Wren6991
50 × 50 mm89 parts4LNo license511Microchip SAM
OpenDropV4
GaudiLabs
124 × 115.4 mm118 parts2LGPL-3.0487Microchip SAM
ModulAdapter universal
GaudiLabs
100 × 69.5 mm45 parts2LGPL-3.0487Microchip SAM
Kira
kiibohd
366.9 × 114.3 mm400 partsCERN-OHL-1.2416