Gluhwurmchen eng
wilderMann·gluhwurmchen·KiCad/gluhwurmchen/gluhwurmchen_eng.kicad_pcb
About the Gluhwurmchen eng PCB
Gluhwurmchen eng is an open source PCB design by wilderMann, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 30.6 × 30.6 mm, with 7 components from 7 distinct parts.
Other key parts include the CR2032. By type, the board carries 2 connectors, 2 diodes, 1 IC, 1 transistor and 1 resistor.
It belongs with the power & battery designs in this gallery.
From the project
Glühwürmchen is a small battery powerd PCB that is easy to solder for beginners and intended for the use in youthwork and schools.
You’ll find the english description below.
Ihr müsst euch dieses Repository herunterladen, die Benötigten Bauteile einkaufen und die Platine produzieren lassen. In der Regel zahlt es sich nicht aus nur ein Glühwürmchen produzieren zu lassen. Ab etwa 100 Platinen macht die Bestellung Sinn.
Die Platine ist Beschriftet wo welches Bauteil hin soll. Die Lötpads sind extra groß um auch für Anfänger einfach lötbar zu sein.

Main components on the Gluhwurmchen eng
Gluhwurmchen eng bill of materials (BOM)
7 components, 7 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CR2032 | CR2032_batteryholder | U1 |
| 1 | 2N3904 | TO-92L_Inline_Handsolder | Q1 |
| 1 | 3V_ext | SolderWirePad_1x01_SMD_2x2mm | J1 |
| 1 | GND_ext | SolderWirePad_1x01_SMD_2x2mm | J2 |
| 1 | LED | LED_D5.0mm_handsolder | D1 |
| 1 | SFH300 | LED_D5.0mm_Clear_handsolder | D2 |
| 1 | 10...100kΩ | R_Axial_12.7mm_handsolder | R1 |
Gluhwurmchen eng design files
The KiCad project lives in the wilderMann/gluhwurmchen repository on GitHub; these links point at the commit this page was built from.
Gluhwurmchen eng: common questions
How big is the Gluhwurmchen eng PCB?
The Gluhwurmchen eng measures 30.6 × 30.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Gluhwurmchen eng?
7 components, from 7 distinct parts. The full bill of materials is listed on this page.
Where can I download the Gluhwurmchen eng design files?
From the wilderMann/gluhwurmchen repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Gluhwurmchen eng design in my own project?
Yes, under the terms of its GPL-3.0 license, which wilderMann chose for the repository.
More boards in gluhwurmchen
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k