Adaptor
williamhaarhoff·foc8313·adaptor/adaptor.kicad_pcb
About the Adaptor PCB
Adaptor is an open source PCB design by williamhaarhoff, published on GitHub. It is a 2-layer board measuring 69 × 13 mm, with 18 components from 14 distinct parts.
Other key parts include the AS5047D. By type, the board carries 10 connectors, 3 resistors, 2 diodes, 2 capacitors and 1 IC.
It belongs with the robotics & motion designs in this gallery.
From the project
Highly compact field oriented controller based on the DRV8313 IC

Main components on the Adaptor
Adaptor bill of materials (BOM)
18 components, 14 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AS5047D | TSSOP-14_4.4x5mm_P0.65mm | U5 |
| 2 | C19268029 XT30(2+2)PB-M.G.B | CONN-TH_XT30PB-M | CN1, CN2 |
| 1 | C133062 BM08B-GHS-TBT(LF)(SN)_C133062 | CONN-SMD_BM08B-GHS-TBT-LF-SN | CN3 |
| 2 | WAFER-GH1.25-10PLB | CONN-SMD_10P-P1.25_XUNPU_WAFER-GH1.25-10PLB | CN5, CN6 |
| 1 | ~ | PinHeader_1x02_P2.00mm_Vertical | J3 |
| 1 | CONN_01X02_SOCKET Conn_01x02_Socket | PinHeader_1x02_P1.27mm_Vertical | J4 |
| 1 | CONN_01X02_SOCKET Conn_01x02_Socket | PinHeader_1x01_P1.27mm_Vertical | J5 |
| 2 | CONN_01X08_SOCKET Conn_01x08_Socket | PinHeader_1x08_P1.27mm_Vertical | J7, J8 |
| 1 | C2290 WHITE | LED_0603_1608Metric | D5 |
| 1 | C2297 GREEN | LED_0603_1608Metric | D7 |
| 1 | 1u | C_0402_1005Metric | C18 |
| 1 | 100N 100n | C_0402_1005Metric | C24 |
| 1 | 10K 10k | R_0402_1005Metric | R5 |
| 2 | 20K 20k | R_0402_1005Metric | R7, R9 |
Adaptor design files
The KiCad project lives in the williamhaarhoff/foc8313 repository on GitHub; these links point at the commit this page was built from.
Adaptor: common questions
How big is the Adaptor PCB?
The Adaptor measures 69 × 13 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Adaptor?
18 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Adaptor design files?
From the williamhaarhoff/foc8313 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Adaptor design in my own project?
The repository has no license, so all rights stay with williamhaarhoff. Use it as a reference, and ask the author before reusing the design.
More boards in foc8313
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kTrollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979Powerstep
rene-dev
95.2 × 71.5 mm28 parts4LGPL-3.097911ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979Diff driver
rene-dev
32 × 22 mm14 parts2LGPL-3.0979