24 open source boards using the AS5047D
Real designs built with the AS5047D, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Sf motion
sirojudinMunir
60 × 56 mm123 parts2LMIT95Microchip SAM
HighPower-Mechaduino
pointhi
60 × 60 mm117 parts2LNo license31ESP32
Wisweep
slimcdk
38.5 × 39.2 mm54 parts4LMIT14RP2040/RP2350
Smol servo rpi2350-tmc6200
dognotdog
48 × 44.5 mm143 parts4LCustom license5ESP32
Extraice
elkel53930
40 × 57 mm72 parts2LMIT4Microchip SAM
Mechaduino-Hardware
IDMIL
43 × 43 mm61 parts2LNo license3STM32
STM32-FOC-Control
Gokasimov
100 × 100 mm118 parts4LMIT2ESP32
Multical eye
slimcdk
38.5 × 39.6 mm59 parts4LMIT2STM32
Tripod-FOC
GoTouchGra55
58.2 × 53.1 mm126 parts4LMIT1Encoder driver
owhite
78.9 × 55.9 mm35 parts4LGPL-3.01RP2040/RP2350
Extraice
elkel53930
38 × 61 mm90 parts2LNo license0- schematic only · 19 partsSTM32
Hw toolkit
El-Guapo2024
19 partsMIT0 RP2040/RP2350
Foc
svofski
82 × 43.5 mm39 parts2LNo license14Adaptor
williamhaarhoff
69 × 13 mm18 parts2LNo license9STM32
Smol servo tmc6200
dognotdog
48 × 44.5 mm116 parts4LCustom license5AVR/Arduino
Atmega328
owhite
55.3 × 55.3 mm25 parts2LGPL-3.01STM32
Stm32-nema17-servo
dognotdog
48 × 44.5 mm93 parts4LCustom license5STM32
Vortac Panel
FoCTow
80 × 80.6 mm82 parts4LNo license2Raspberry Pi
Sub boards
elkel53930
84 × 108 mm22 parts2LMIT2Sub boards
elkel53930
65.3 × 47.5 mm14 parts2LNo license2STM32
Smol servo nomcu tmc6200
dognotdog
48 × 44.5 mm90 parts4LCustom license5STM32
VORTAC REV1
FoCTow
39.2 × 33.4 mm75 parts4LNo license2Bluesat encoder board
bluesatunsw
30 × 23 mm3 parts2LApache-2.05Crac as5047
Darkzveller
20 × 20 mm4 parts2LNo license0
How designs wire the AS5047D
Read from the KiCad layouts of 18 open source designs, one per repository: what each pin of the AS5047D connects to, and the resistors, capacitors and other passives placed on it.
- The VDD pin has a decoupling capacitor on 14 of 18 designs, most often 100 nF (then 1 µF).
- The VDD3V3 pin has a decoupling capacitor on 14 of 18 designs, most often 100 nF (then 1 µF).
- The W/PWM pin is left unconnected on 15 of 16 designs.
- The V pin is left unconnected on 15 of 16 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| TSTpin 5 | Connected to: GND 67% · a signal 22% | — |
| Bpin 6 | Connected to: Not connected 72% · a signal 28% | — |
| Apin 7 | Connected to: Not connected 72% · a signal 28% | — |
| W/PWMpin 8 | Connected to: Not connected 94% | — |
| Vpin 9 | Connected to: Not connected 94% | — |
| Upin 10 | Connected to: Not connected 94% | — |
| VDDpin 11 | Connected to: 3.3V 78% · not connected 17% |
|
| VDD3V3pin 12 | Connected to: 3.3V 67% · a signal 33% |
|
| GNDpin 13 | Connected to: GND 78% · a signal 22% | — |
| I/PWMpin 14 | Connected to: Not connected 78% · a signal 22% | — |
4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Sf motion by sirojudinMunir, HighPower-Mechaduino by pointhi, Wisweep by slimcdk and Foc by svofski.
The AS5047D in open source designs
The gallery holds 24 open source boards using the AS5047D from 19 GitHub repositories; a typical one measures about 48 × 44.5 mm and carries around 67 components.
52% are two-layer designs, the rest use four layers or more, and 46% carry an open source license.
The most starred is Sf motion by sirojudinMunir.
Parts used alongside the AS5047D
Microcontrollers on boards using the AS5047D
What boards using the AS5047D are built for
AS5047D: common questions
Where can I find a AS5047D reference design?
Each of the 24 boards on this page is a real design using the AS5047D. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the AS5047D VDD pin?
The VDD pin has a decoupling capacitor on 14 of 18 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 18 open source designs using the AS5047D.
What decoupling capacitors do designs use on the AS5047D VDD3V3 pin?
The VDD3V3 pin has a decoupling capacitor on 14 of 18 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 18 open source designs using the AS5047D.
How is the AS5047D W/PWM pin connected?
The W/PWM pin is left unconnected on 15 of 16 designs. Counted from the KiCad layouts of 18 open source designs using the AS5047D.
What parts are used alongside the AS5047D?
The USBLC6-2SC6, DRV8837C, ESP32-C6-MINI-1/U, INA240A1PW and LM321 appear in the most repositories here.
Which microcontrollers do boards using the AS5047D use?
Most are built on STM32 (9), ESP32 (3), RP2040/RP2350 (3) and Microchip SAM (2).
How big is a typical board using the AS5047D?
The median is 48 × 44.5 mm, and 52% are two-layer designs.
What is the most popular open source board using the AS5047D?
By GitHub stars, Sf motion by sirojudinMunir, with 95 stars.
Can I simulate one of these boards using the AS5047D before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.