HardLabs

Lsm6dsoxCANEnabled

WilliamLim781·PCB_practice·lsm6dsoxCANEnabled/lsm6dsoxCANEnabled.kicad_pcb

Lsm6dsoxCANEnabled PCB layout, top view — open source STM32 board by WilliamLim781
Simulate this board

About the Lsm6dsoxCANEnabled PCB

Lsm6dsoxCANEnabled is an open source STM32 PCB design by WilliamLim781, published on GitHub. It is a 4-layer board measuring 49.4 × 47.9 mm, with 32 components from 22 distinct parts.

Its main chip is the C8734, from the STM32 family. Other key parts include the C481766, C7432801 and C6186. By type, the board carries 14 capacitors, 5 connectors, 5 resistors, 4 ICs, 2 switches and 1 crystal.

Main components on the Lsm6dsoxCANEnabled

C481766C7432801C8734C6186

Lsm6dsoxCANEnabled bill of materials (BOM)

32 components, 22 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
C481766
~
U1
1
C7432801
TJA1051T
U2
1
C8734
STM32F103C8Tx
U3
1
C6186
AMS1117-3.3
U5
1
C12668
16mhz
Y1
1
Termination Resistor
J1
1
GPIO
J2
1
Power
J3
1
SWD
J4
1
CANH and CANL input n output
J5
1
C2801823
Nrst
SW1
1
C221660
BOOT0
SW2
1
C2290
LED
D1
8
C14663
100n
C1, C6, C7, C8, C9, C11, C13, C14
2
C126546
14p
C2, C3
1
C386081
10u
C4
1
C318688
22u
C5
1
C711094
4.7u
C10
1
C106858
1u
C12
3
C4190
2k2
R1, R2, R5
Show 2 more
QtyPartRefs
1
C21189
0
R3
1
C22787
120
R4

Lsm6dsoxCANEnabled design files

The KiCad project lives in the WilliamLim781/PCB_practice repository on GitHub; these links point at the commit this page was built from.

Lsm6dsoxCANEnabled: common questions

What microcontroller does the Lsm6dsoxCANEnabled use?

The Lsm6dsoxCANEnabled is built around the C8734, from the STM32 family.

How big is the Lsm6dsoxCANEnabled PCB?

The Lsm6dsoxCANEnabled measures 49.4 × 47.9 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Lsm6dsoxCANEnabled?

32 components, from 22 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Lsm6dsoxCANEnabled design files?

From the WilliamLim781/PCB_practice repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Lsm6dsoxCANEnabled design in my own project?

The repository has no license, so all rights stay with WilliamLim781. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Lsm6dsoxCANEnabled without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in PCB_practice

Similar boards