Wien + distortion
About the Wien + distortion PCB
Wien + distortion is an open source PCB design by WilliamLim781, published on GitHub. It is a 2-layer board measuring 45 × 36 mm, with 40 components from 25 distinct parts.
Other key parts include the NE5532. By type, the board carries 13 resistors, 9 capacitors, 5 connectors, 4 diodes, 2 ICs and 1 battery holder.
Main components on the Wien + distortion
Wien + distortion bill of materials (BOM)
40 components, 25 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | NE5532 | DIP-8_W7.62mm_LongPads | U1, U2 |
| 1 | INPUT | PinHeader_1x02_P2.54mm_Vertical | J1 |
| 2 | OUTPUT | PinHeader_1x02_P2.54mm_Vertical | J2, J5 |
| 1 | PWR switch | PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | GND connections | PinHeader_1x03_P2.54mm_Vertical | J6 |
| 1 | 9V | PinHeader_1x02_P2.54mm_Vertical | BT1 |
| 1 | 100K 100k | PinHeader_1x03_P2.54mm_Vertical | DualPot1 |
| 1 | 20k? tone | PinHeader_1x03_P2.54mm_Vertical | RV1 |
| 1 | Volume | PinHeader_1x03_P2.54mm_Vertical | RV2 |
| 1 | Gain/distortion | PinHeader_1x03_P2.54mm_Vertical | RV3 |
| 1 | DUALPOT2 DualPot2 | PinHeader_1x03_P2.54mm_Vertical | RV4 |
| 1 | Gain10k? | PinHeader_1x03_P2.54mm_Vertical | RV5 |
| 4 | C81598 1n4148 | D_SOD-123 | D1, D2, D3, D4 |
| 2 | C57112 10n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2 |
| 1 | C96446 10u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3 |
| 4 | C14663 100n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4, C5, C7, C8 |
| 2 | C15849 1u? | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C6, C9 |
| 1 | C4190 2k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 2 | C25804 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R12 |
| 1 | C25819 47k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3 |
Show 5 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | C23162 4k7 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R5 |
| 2 | C4190 2k2 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6, R7 |
| 2 | C22775 100 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8, R10 |
| 2 | C22935 1M | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9, R11 |
| 1 | C22775 100? | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R13 |
Wien + distortion design files
The KiCad project lives in the WilliamLim781/PCB_practice repository on GitHub; these links point at the commit this page was built from.
Wien + distortion: common questions
How big is the Wien + distortion PCB?
The Wien + distortion measures 45 × 36 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Wien + distortion?
40 components, from 25 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Wien + distortion design files?
From the WilliamLim781/PCB_practice repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Wien + distortion design in my own project?
The repository has no license, so all rights stay with WilliamLim781. Use it as a reference, and ask the author before reusing the design.
More boards in PCB_practice
STM32Rev2.1
91.8 × 94.5 mm116 parts4LNo license1
STM32Rev2.2
91.8 × 94.5 mm114 parts4LNo license1
STM32Stm32f429z
153 × 114.3 mm79 parts4LNo license1
STM32ESC
66.6 × 64.2 mm59 parts4LNo license1
AVR/ArduinoKeyboard
100 × 123.8 mm57 parts2LNo license1
STM32Rev2
49.9 × 49.8 mm49 parts4LNo license1
STM32Tuner
48.3 × 40.8 mm46 parts4LNo license1
Distortion
100.3 × 100 mm36 parts2LNo license1
STM32STM32F030
88.9 × 69.1 mm36 parts4LNo license1
STM32Stm32f405rgt6
87.6 × 73.7 mm33 parts4LNo license1
STM32Lsm6dsoxCANEnabled
49.4 × 47.9 mm32 parts4LNo license1