Rev2.2
WilliamLim781·PCB_practice·Rev2.2/Rev2.2.kicad_pcb
About the Rev2.2 PCB
Rev2.2 is an open source STM32 PCB design by WilliamLim781, published on GitHub. It is a 4-layer board measuring 91.8 × 94.5 mm, with 114 components from 52 distinct parts.
Its main chip is the C84808, from the STM32 family. Other key parts include the C7432801, C2891839, C481766, C135998 and C2827693. By type, the board carries 58 resistors, 24 capacitors, 18 connectors, 7 ICs, 4 diodes and 2 switches.
Main components on the Rev2.2
Rev2.2 bill of materials (BOM)
114 components, 52 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | C84808 STM32F429ZITx | LQFP-144_20x20mm_P0.5mm | U1 |
| 2 | C7432801 TJA1051T | SOIC-8_3.9x4.9mm_P1.27mm | U2, U4 |
| 1 | C2891839 AMS1117-3.3 | SOT-223-3_TabPin2 | U3 |
| 1 | C481766 ~ | LGA-14_3x2.5mm_P0.5mm_LayoutBorder3x4y | U5 |
| 1 | C135998 STMPS2151STR(Current protection) | SOT-23-5_HandSoldering | U9 |
| 1 | C2827693 USBLC6-2P6(ESD protection) | SOT-666 | U10 |
| 1 | 16MHZ 16MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y2 |
| 2 | Termination | PinHeader_1x02_P2.54mm_Vertical | J1, J3 |
| 1 | CAN2 | TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal | J2 |
| 1 | CAN1 | TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal | J4 |
| 1 | SWD | PinHeader_1x03_P2.54mm_Vertical | J5 |
| 1 | USB_OTG | USB_Mini-B_Wuerth_65100516121_Horizontal | J6 |
| 1 | GPIO1 | TerminalBlock_Phoenix_MKDS-1,5-4_1x04_P5.00mm_Horizontal | J7 |
| 2 | AIN4 | TerminalBlock_Phoenix_MKDS-1,5-4_1x04_P5.00mm_Horizontal | J8, J18 |
| 1 | AIN5 | TerminalBlock_Phoenix_MKDS-1,5-4_1x04_P5.00mm_Horizontal | J9 |
| 1 | CONN_01X08_PIN USART1 | PinHeader_1x03_P2.54mm_Vertical | J10 |
| 1 | 3.3V power breakout | PinHeader_1x02_P2.54mm_Vertical | J11 |
| 1 | 5V power breakout | PinHeader_1x02_P2.54mm_Vertical | J12 |
| 1 | 8P8C_LED AIN1 | TerminalBlock_Phoenix_MKDS-1,5-4_1x04_P5.00mm_Horizontal | J13 |
| 1 | GPIO2 USB C PWR | USB_C_Receptacle_GCT_USB4135-GF-A_6P_TopMnt_Horizontal | J14 |
Show 32 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | USART6 | PinHeader_1x03_P2.54mm_Vertical | J15 |
| 1 | AIN2 | TerminalBlock_Phoenix_MKDS-1,5-4_1x04_P5.00mm_Horizontal | J16 |
| 1 | AIN3 | TerminalBlock_Phoenix_MKDS-1,5-4_1x04_P5.00mm_Horizontal | J17 |
| 1 | C221841 SW_SPDT | SW_SPDT_PCM12 | SW3 |
| 1 | SW_Push | SW_SPST_PTS645 | SW5 |
| 1 | C72038 LED1 | LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1 |
| 1 | C72038 LED2 | LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D2 |
| 1 | LED3 | LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D3 |
| 1 | LED4 | LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D4 |
| 16 | C14663 100n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C23, C24, C25, C28, C33, C34, C35 +8 |
| 1 | C96446 10u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C26 |
| 2 | C282076 9p | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C27, C31 |
| 2 | C23630 2.2u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C29, C30 |
| 1 | C59461 22u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C32 |
| 1 | C19666 4.7u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C42 |
| 1 | C15849 1u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C44 |
| 2 | C22787 120 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2 |
| 14 | C25804 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R9, R10, R11, R12, R13, R14, R15 +6 |
| 1 | 0 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4 |
| 1 | C509091 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5 |
| 2 | C4190 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6, R7 |
| 1 | C23186 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8 |
| 8 | C23189 20k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R17, R18, R19, R20, R21, R22, R23, R24 |
| 4 | C4275 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R25, R26, R27, R28 |
| 2 | C22966 20k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R29, R30 |
| 4 | C849792 20k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R31, R32, R33, R34 |
| 1 | C305156 20k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R35 |
| 1 | C25804 20k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R36 |
| 3 | C23140 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R38, R43, R44 |
| 2 | C4190 2k2 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R45, R46 |
| 8 | 20k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R47, R48, R49, R50, R51, R52, R53, R54 |
| 4 | 100 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R55, R56, R57, R58 |
Rev2.2 design files
The KiCad project lives in the WilliamLim781/PCB_practice repository on GitHub; these links point at the commit this page was built from.
- LayoutRev2.2/Rev2.2.kicad_pcb
- SchematicRev2.2/Rev2.2.kicad_sch
- BOMRev2.2/BOM/BOM.csv
Rev2.2: common questions
What microcontroller does the Rev2.2 use?
The Rev2.2 is built around the C84808, from the STM32 family.
How big is the Rev2.2 PCB?
The Rev2.2 measures 91.8 × 94.5 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Rev2.2?
114 components, from 52 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Rev2.2 design files?
From the WilliamLim781/PCB_practice repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Rev2.2 design in my own project?
The repository has no license, so all rights stay with WilliamLim781. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Rev2.2 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in PCB_practice
STM32
Rev2.1
WilliamLim781
91.8 × 94.5 mm116 parts4LNo license1STM32
Stm32f429z
WilliamLim781
153 × 114.3 mm79 parts4LNo license1STM32
ESC
WilliamLim781
66.6 × 64.2 mm59 parts4LNo license1AVR/Arduino
Keyboard
WilliamLim781
100 × 123.8 mm57 parts2LNo license1STM32
Rev2
WilliamLim781
49.9 × 49.8 mm49 parts4LNo license1STM32
Tuner
WilliamLim781
48.3 × 40.8 mm46 parts4LNo license1Wien + distortion
WilliamLim781
45 × 36 mm40 parts2LNo license1Distortion
WilliamLim781
100.3 × 100 mm36 parts2LNo license1STM32
STM32F030
WilliamLim781
88.9 × 69.1 mm36 parts4LNo license1STM32
Stm32f405rgt6
WilliamLim781
87.6 × 73.7 mm33 parts4LNo license1STM32
Lsm6dsoxCANEnabled
WilliamLim781
49.4 × 47.9 mm32 parts4LNo license1
Similar boards
STM32
AxxSolder
AxxAxx
39 × 82.5 mm122 parts2LGPL-3.01.7kSTM32
AIOC
skuep
21 × 31.5 mm47 parts2LMIT1.4kSTM32
Ferris
pierrechevalier83
208.8 × 86.8 mm102 parts2LSHL-2.11.3kSTM32
Module 16S
stuartpittaway
71.1 × 89.6 mm113 parts4LCC-BY-NC-4.01.1kSTM32
Djinn
tzarc
192.3 × 150.5 mm216 parts2LCERN-OHL-S-2.0988STM32
Ghoul
tzarc
228.6 × 79.4 mm163 parts2LCERN-OHL-S-2.0988