73 open source boards using the C6186
Real designs built with the C6186, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
CBC
Arrow-air
178 × 211 mm301 parts6LCERN-OHL-S-2.0175ESP32
MRR ESPA
maplerainresearch
99.5 × 90.5 mm126 parts2LCERN-OHL-1.258ESP32
Panel
NandXor96
76 × 72 mm86 parts2LNo license40ESP32
MRR ESPE
maplerainresearch
102 × 102 mm164 parts2LCERN-OHL-1.238TI MSP430/CC
Nsumo hardware
artfulbytes
50 × 65 mm73 parts2LMIT33ESP8266
DCTransistor Bidirectional
LArkema
304.8 × 304.8 mm270 parts2LCC-BY-NC-4.030Hw microdiff
aw
22.5 × 46 mm26 parts4LCC-BY-SA-4.09RP2040/RP2350
KnH0F
kodachi614
160 × 120 mm179 parts2LNo license7ESP32
Main board
felixzero
84.5 × 54.6 mm75 parts2LGPL-3.07ESP32
Edgedriver
brainsmoke
82.8 × 70.7 mm26 parts2LNo license7STM32
Bd845-pwb board
bluedot-arcade
185 × 110 mm172 parts4LCERN-OHL-S-2.04RP2040/RP2350
Electronics
Project-Stinger
89.8 × 64 mm113 parts4LCustom license4STM32
Net bmp
elagil
33.5 × 66.8 mm94 parts4LGPL-3.03RP2040/RP2350
RP2040-Eins
red-scorp
68.6 × 53.3 mm64 parts4LNo license3Raspberry Pi
Pi sfp
blackbit42
65 × 56 mm48 parts2LNo license3RP2040/RP2350
MacroPad
landodoughty
79.2 × 106.7 mm109 parts2LMIT2AVR/Arduino
Halo
wyolum
243.8 × 66.3 mm152 parts2LApache-2.01RP2040/RP2350
MicroNES
bchelf
101.6 × 70 mm92 parts4LNo license1ESP32
Oomwoo esp32s3-cm
makerspet
110.2 × 110.5 mm86 parts2LApache-2.01Esp ir receiver
valletw
33.1 × 21.5 mm46 parts4LMIT1ESP32-CAM AI Camera
mauroxf
33 × 71 mm17 parts2LMIT1STM32
TheFalcon Panel
Matthew-Hammon
185.7 × 303.9 mm334 parts4LMIT0RP2040/RP2350
SKYWAY-96
RivasMario
362 × 114.3 mm281 parts2LNo license0STM32
CCTV3 F407 REV200
aiex718
70 × 80 mm220 parts4LNo license0FPGA
ProgrammaGull Sandpiper
4n3m4i1
100 × 75 mm213 parts4LMIT0ESP32
PendingHome
syncmeta
130 × 164 mm199 parts2LMIT0STM32
Projet lcd
Rancunefr
125 × 100 mm179 parts8LNo license0STM32
PCB DRONE R8
ArduProject
102 × 49 mm150 parts4LMIT0RP2040/RP2350
OpenPEMF
openPEMF
49.7 × 99.8 mm113 parts4LMIT0STM32
Micromouse
tadzio8425
99.3 × 98.9 mm97 parts4LMIT0ESP32
Panel
Charles-Goodwin
76 × 72 mm86 parts2LNo license0RP2040/RP2350
E-Ink-Badge
Acidicts
77.5 × 48.5 mm78 parts2LNo license0TI MSP430/CC
Nsumo hardware main
Jason-sketch729
50 × 65 mm73 parts2LNo license0ESP32
Probe
zuhayrl
50 × 50 mm73 parts4LNo license0ESP32
Mixxtape
funvill
99.5 × 63.5 mm67 parts2LNo license0RP2040/RP2350
Embedded-Board
nicolas-viale
80 × 60 mm67 parts2LNo license0
How designs wire the C6186
Read from the KiCad layouts of 53 open source designs, one per repository: what each pin of the C6186 connects to, and the resistors, capacitors and other passives placed on it.
- The VI pin has a decoupling capacitor on 39 of 53 designs, most often 10 µF (then 100 nF).
- The VO pin has a decoupling capacitor on 24 of 53 designs, most often 10 µF (then 22 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1 | Connected to: GND 89% | — |
| VOpin 2 | Connected to: 3.3V 83% |
|
| VIpin 3 | Connected to: 5V 81% · a signal 17% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include CBC PCB by Arrow-air, MRR ESPA by maplerainresearch, Usbwledc by NandXor96 and MRR ESPE by maplerainresearch.
The C6186 in open source designs
The gallery holds 73 open source boards using the C6186 from 55 GitHub repositories; a typical one measures about 78.3 × 70 mm and carries around 73 components.
64% are two-layer designs, the rest use four layers or more, and 37% carry an open source license.
The most starred is CBC PCB by Arrow-air.
Parts used alongside the C6186
Microcontrollers on boards using the C6186
What boards using the C6186 are built for
C6186: common questions
Where can I find a C6186 reference design?
Each of the 73 boards on this page is a real design using the C6186. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the C6186 VI pin?
The VI pin has a decoupling capacitor on 39 of 53 designs, most often 10 µF (then 100 nF). Counted from the KiCad layouts of 53 open source designs using the C6186.
What decoupling capacitors do designs use on the C6186 VO pin?
The VO pin has a decoupling capacitor on 24 of 53 designs, most often 10 µF (then 22 µF). Counted from the KiCad layouts of 53 open source designs using the C6186.
What parts are used alongside the C6186?
The C97521, C2040, C6187, C84681 and C7519 appear in the most repositories here.
Which microcontrollers do boards using the C6186 use?
Most are built on ESP32 (22), RP2040/RP2350 (16), STM32 (15) and AVR/Arduino (6).
How big is a typical board using the C6186?
The median is 78.3 × 70 mm, and 64% are two-layer designs.
What is the most popular open source board using the C6186?
By GitHub stars, CBC PCB by Arrow-air, with 175 stars.
Can I simulate one of these boards using the C6186 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.