9 open source boards using the C2827693

Real designs built with the C2827693, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

9 boardsClear filters|Most starred

How designs wire the C2827693

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the C2827693 connects to, and the resistors, capacitors and other passives placed on it.

  • The VBUS pin has a decoupling capacitor on 2 of 5 designs, most often 100 nF (then 1 µF).
GNDpin 2Connected to: GND 80% · a signal 20%
VBUSpin 5Connected to: VBUS 60% · a signal 40%
  • Decoupling capacitor on 40% · 100 nF (2), 1 µF (1)

2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Epdiy v7 by vroland, Rana Tadpole V2 by rana-sylvatica, Pixie device by firefly and Headless tef lite by FMDX-org.

The C2827693 in open source designs

The gallery holds 9 open source boards using the C2827693 from 5 GitHub repositories; a typical one measures about 91.8 × 74.9 mm and carries around 108 components.

78% use four copper layers or more, and 44% carry an open source license.

The most starred is Kaleido 6" controller based on epdiy v7 by vroland.

Parts used alongside the C2827693

Microcontrollers on boards using the C2827693

What boards using the C2827693 are built for

C2827693: common questions

Where can I find a C2827693 reference design?

Each of the 9 boards on this page is a real design using the C2827693. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the C2827693 VBUS pin?

The VBUS pin has a decoupling capacitor on 2 of 5 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 5 open source designs using the C2827693.

Which microcontrollers do boards using the C2827693 use?

Most are built on ESP32 (4), STM32 (4) and RP2040/RP2350 (1).

How big is a typical board using the C2827693?

The median is 91.8 × 74.9 mm, and 22% are two-layer designs.

What is the most popular open source board using the C2827693?

By GitHub stars, Kaleido 6" controller based on epdiy v7 by vroland, with 74 stars.

Can I simulate one of these boards using the C2827693 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part