HardLabs

1005-Flash-Programmer

wilsondr9999·1005-Flash-Programmer·KiCAD Project/1005 Flash Programmer/1005 Flash Programmer.kicad_pcb

1005-Flash-Programmer PCB layout, top view — open source PIC board by wilsondr9999

About the 1005-Flash-Programmer PCB

1005-Flash-Programmer is an open source PIC PCB design by wilsondr9999, published on GitHub under the AGPL-3.0 license. It is a 4-layer board measuring 88.3 × 54.6 mm, with 31 components from 18 distinct parts.

Its main chip is the PIC16F15256-I/SP, from the PIC family. Other key parts include the L7805CV and SN74HC595NE4. By type, the board carries 10 resistors, 7 capacitors, 4 ICs, 4 connectors, 4 diodes and 2 transistors.

It belongs with the usb & debug tools designs in this gallery.

From the project

Flash Programmer for SST39 Flash ROMs

This is a simple PCB, firmware, and software that can read and write binary image files to the Microchip SST39 series of flash ROMs. These flash ROMs are one of the very few flash ROMs on the market that are still active production and in DIP packages, making them a popular replacement for the difficult-to-find AT28 series of EEPROMs.

This programmer handles the SST39SF010, SST39SF020, and SST39SF040 parts (128KB, 256KB, and 512KB respectively).

Main components on the 1005-Flash-Programmer

L7805CVPIC16F15256-I/SPSN74HC595NE4

1005-Flash-Programmer bill of materials (BOM)

31 components, 18 distinct parts.

QtyPartRefs
1
L7805CV
STMicroelectronics
U301
1
PIC16F15256-I/SP
PIC16F15256-xSP
Microchip Technology
U401
2
SN74HC595NE4
Texas Instruments
U501, U502
1
BC558
NTE Electronics, Inc
Q201
1
BC548
Fairchild Semiconductor
Q202
1
A-2004-2-4-LP-N-R
Amphenol ICC (FCI)
J201
1
PJ-102B
Barrel_Jack_Switch
CUI Devices
J301
1
PH1-05-UA
ICSP
Adam Tech
J401
1
32-6554-10
Aries Electronics
J601
1
1N4148
onsemi
D201
1
SSL-LX5093USBD
LED
Lumex Opto/Components Inc.
D301
1
LTL-307A
LED
LITEON
D401
1
LTL-4233
LED
LITEON
D402
6
FG28X7R1H104KNT06
0.1uF
TDK Corporation
C201, C302, C401, C501, C502, C601
1
FA24X7R1H334KNU06
0.33uF
TDK Corporation
C301
4
MFR-25FBF52-10K
10K
YAGEO
R201, R202, R204, R401
3
MFR-25FBF52-4K7
4.7K
YAGEO
R203, R205, R206
3
MFR-25FBF52-300R
300
YAGEO
R301, R402, R403

1005-Flash-Programmer design files

The KiCad project lives in the wilsondr9999/1005-Flash-Programmer repository on GitHub; these links point at the commit this page was built from.

1005-Flash-Programmer: common questions

What microcontroller does the 1005-Flash-Programmer use?

The 1005-Flash-Programmer is built around the PIC16F15256-I/SP, from the PIC family.

How big is the 1005-Flash-Programmer PCB?

The 1005-Flash-Programmer measures 88.3 × 54.6 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the 1005-Flash-Programmer?

31 components, from 18 distinct parts. The full bill of materials is listed on this page.

Where can I download the 1005-Flash-Programmer design files?

From the wilsondr9999/1005-Flash-Programmer repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the 1005-Flash-Programmer design in my own project?

Yes, under the terms of its AGPL-3.0 license, which wilsondr9999 chose for the repository.

Can I test firmware for the 1005-Flash-Programmer without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug PIC firmware against it before you order a PCB.

Similar boards