Winnand tkl board

winnand·winnand-tkl-board·KeyboardPCB/KeyboardPCB.kicad_pcb

Winnand tkl board layout, top view — open source Raspberry Pi board by winnand

About the Winnand tkl board

Winnand tkl board is an open source Raspberry Pi PCB design by winnand, published on GitHub. It is a 2-layer board measuring 350.5 × 124.5 mm, with 176 components from 12 distinct parts.

Its main chip is the RaspberryPi_Pico_W, from the Raspberry Pi family. By type, the board carries 87 switches, 87 diodes, 1 module and 1 connector.

It belongs with the keyboards designs in this gallery.

From the project

This keyboard expands on Joe Scotto's guide on YouTube to a full TKL keyboard and adds a rotary encoder for volume control.

This project is a custom keyboard based off of JoeScotto's guides from YouTube. It is a standard TKL Board which replaces the Pause key with a rotary encoder. It uses QMK with Vial support for on-the-go layout customization.

I made this project because I enjoyed the idea of having a keyboard that I made myself, with the features and rigidity of a top-of-the-line keyboard. I hoped that it would teach me more about firmware and microcontrollers for future projects, and have a good keyboard that I would be able to use for many years to come.

Winnand tkl board, from the project README
From the project README

Main components on the Winnand tkl board

Winnand tkl board bill of materials (BOM)

176 components, 12 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
RaspberryPi_Pico_W
A0
1
CONN_01X04_PIN
Conn_01x04_Pin
J1
71
~
S1, S2, S3, S4, S5, S6, S7, S8 +63
1
~
S30
2
~
S34, S47
1
~
S51
2
~
S63, S64
1
~
S75
7
~
S77, S78, S79, S81, S82, S83, S84
1
~
S80
1
RotaryEncoder_Switch
SW0
87
~
D1, D2, D3, D4, D5, D6, D7, D8 +79

Winnand tkl board design files

The KiCad project lives in the winnand/winnand-tkl-board repository on GitHub; these links point at the commit this page was built from.

Winnand tkl board: common questions

What microcontroller does the Winnand tkl board use?

The Winnand tkl board is built around the RaspberryPi_Pico_W, from the Raspberry Pi family.

How big is the Winnand tkl board?

The Winnand tkl board measures 350.5 × 124.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Winnand tkl board?

176 components, from 12 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Winnand tkl board design files?

From the winnand/winnand-tkl-board repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Winnand tkl board design in my own project?

The repository has no license, so all rights stay with winnand. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Winnand tkl board without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Raspberry Pi firmware against it before you order a PCB.

Similar boards