RPi power logger
Wireb·RPi_power_logger·KiCad/RPi_power_logger.kicad_pcb
About the RPi power logger PCB
RPi power logger is an open source Raspberry Pi PCB design by Wireb, published on GitHub under the MIT license. It is a 2-layer board measuring 65 × 30 mm, with 40 components from 14 distinct parts.
Its main chip is the Raspberry_Pi_2_3, from the Raspberry Pi family. Other key parts include the INA233 and NCD9830. By type, the board carries 21 resistors, 14 capacitors, 2 ICs and 2 connectors.
It belongs with the wearables and power & battery designs in this gallery.
From the project
Raspberry Pi zero based battery power data logger.
If you just want PCBs now they are available on OSHpark here: https://oshpark.com/shared_projects/NPSVbO1J
Permission is hereby granted, free of charge, to any person obtaining a copy of this hardware, software, and associated documentation files (the "Product"), to deal in the Product without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Product, and to permit persons to whom the Product is furnished to do so, subject to the following conditions:
Main components on the RPi power logger
RPi power logger bill of materials (BOM)
40 components, 14 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | INA233 | MSOP-10_W3mm | U1 |
| 1 | NCD9830 | TSSOP-16_4.4x5mm_Pitch0.65mm | U2 |
| 1 | OSTTE120104 | TerminalBlock_Phoenix_PT-3.5mm_12pol | J1 |
| 1 | Raspberry_Pi_2_3 | Pin_Header_Straight_2x20_Pitch2.54mm | J2 |
| 1 | Metroid | metroid | icon1 |
| 12 | 0.1uF | C_0603 | C1, C2, C3, C4, C5, C6, C7, C8 +4 |
| 2 | 10uF | C_0805 | C13, C14 |
| 3 | 60k | R_0603 | R1, R2, R3 |
| 3 | 140k | R_0603 | R4, R5, R6 |
| 2 | 500k | R_0603 | R7, R8 |
| 8 | 100k | R_0603 | R9, R10, R11, R12, R13, R14, R15, R16 |
| 1 | LVK12R010DER | LVK12 | R17 |
| 1 | 5 | R_0603 | R18 |
| 3 | 10k | R_0603 | R19, R20, R21 |
RPi power logger design files
The KiCad project lives in the Wireb/RPi_power_logger repository on GitHub; these links point at the commit this page was built from.
RPi power logger: common questions
What microcontroller does the RPi power logger use?
The RPi power logger is built around the Raspberry_Pi_2_3, from the Raspberry Pi family.
How big is the RPi power logger PCB?
The RPi power logger measures 65 × 30 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the RPi power logger?
40 components, from 14 distinct parts. The full bill of materials is listed on this page.
Where can I download the RPi power logger design files?
From the Wireb/RPi_power_logger repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the RPi power logger design in my own project?
Yes, under the terms of its MIT license, which Wireb chose for the repository.
Can I test firmware for the RPi power logger without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Raspberry Pi firmware against it before you order a PCB.
Similar boards
Raspberry Pi
Open source rover
nasa-jpl
220 × 178 mm144 parts2LApache-2.09.7kRaspberry Pi
Iot
dotnet
56 × 65 mm24 parts2LMIT2.4kRaspberry Pi
SPIRIT
SPIRIT-org
82 × 155 mm130 parts6LCERN-OHL-S-2.01.3kRaspberry Pi
CM5RevEng
schlae
55 × 40 mm417 parts10LNo license1.0kRaspberry Pi
Haxo hw
cardonabits
102.4 × 211.3 mm38 parts2LCustom license673Raspberry Pi
Phased
Neumi
75 × 100 mm71 parts2LNo license507